Collection: EGR Delete Kits

SPELAB’s high-performance EGR Delete Kits are more than just a power upgrade — they’re a long-term solution for boosting reliability and optimizing your diesel engine’s overall performance. By addressing common EGR system failures, improving airflow, and enhancing fuel efficiency, SPELAB helps your Powerstroke, Cummins, or Duramax engine operate at its full potential.

1. What Is the EGR System? (Factory Configuration Overview)

From the factory, the Exhaust Gas Recirculation (EGR) system is designed to reduce emissions by recirculating a portion of exhaust gases back into the intake manifold. This lowers combustion temperatures and helps reduce nitrogen oxide (NOx) emissions.

Here are the typical components of a factory EGR system:

• EGR Valve: An electronically controlled valve that regulates exhaust gas flow back into the intake.

• EGR Cooler: Cools the recirculated exhaust gases before they enter the engine, reducing temperature spikes.

• EGR Tube / Pipe: Carries exhaust gases from the exhaust manifold to the intake manifold.

• EGR Solenoid: Controls EGR valve operation electronically.

• EGR Sensors (Temperature / Pressure / Position): Monitor the EGR system in real-time.

• Differential Pressure Sensor: Measures pressure differences across the EGR system to track flow.

• Coolant Lines: Provide cooling to the EGR cooler unit.

• ECU (Engine Control Unit): Manages when and how the EGR system activates.

Diesel trucks — especially the 6.7L Cummins, 6.0L Powerstroke, and LML Duramax — are typically equipped with all of the above. While these components work together to meet emissions standards, they are prone to clogging, coolant leaks, and valve malfunctions under heavy loads or long-term use.

2. What Changes After Installing a SPELAB EGR Delete Kit?

SPELAB’s EGR Delete Kits are engineered for precision and reliability across all major diesel platforms — Powerstroke, Cummins, and Duramax — and are designed to simplify the engine’s exhaust recirculation system while maintaining core performance integrity.

After installing a delete kit, here’s what changes:

• EGR Valve & Cooler → Removed or blocked off, disabling exhaust gas recirculation.

• EGR Tubes → Disconnected or sealed at both ends with block-off plates.

• Solenoids & Sensors → Disconnected from function, and EGR-related codes suppressed via ECU tuning (EZ Lynk, EFI Live, etc.).

• ECU Logic → Modified to permanently disable EGR control, preventing CELs like P0401 or P0402.

• Coolant Lines → Rerouted or capped off to bypass the former EGR cooling system.

• Intake Airflow → Clean air only — no exhaust recirculation, leading to better combustion and response.

• Engine Operation → Runs cooler and cleaner, with reduced carbon buildup and improved turbo & engine longevity.

3. Why Choose a SPELAB EGR Delete Kit?

SPELAB’s EGR Delete Kits are more than just hardware — they’re engineered performance solutions tailored for diesel truck owners who demand reliability, power, and efficiency.

Here’s what sets them apart:

✅ Eliminate common EGR failures like stuck valves, leaking coolers, and faulty sensors
✅ Reduce carbon buildup, improve airflow, and optimize combustion efficiency
✅ Boost fuel economy, throttle response, and engine reliability
✅ Fix persistent check engine lights and codes (P0401, P0402, P0405) — when paired with proper tuning

Even better, SPELAB offers EGR Delete Kit + Tuner compatible with platforms like EFI Live, EZ Lynk, and SCT, so you can get everything you need in one go:

• Complete kits that include both hardware and tuning solutions
• No need to hunt for parts or match components — it’s all in the box
• Highly recommended: Full delete kit (EGR + DPF + CCV + Tuner) for maximum performance gains

Whether you're hauling heavy loads, racing, off-roading, or driving a commercial or farm-use diesel, SPELAB delivers the most vehicle-specific, reliable, and proven EGR delete solutions for Powerstroke, Cummins, and Duramax platforms.

4. Fits 1998–2025 Diesel Trucks | Built for Your Engine

SPELAB’s EGR Delete Kits are engineered to fit a wide variety of diesel truck platforms between 1998 and 2025, including:

• Ford Powerstroke
  

• 3.0L, 6.0L, 6.4L, and 6.7L diesel engines
• Models: F-250, F-350, F-450, F-550 (2003–2025)
• Popular searches: 2006 F250 6.0 EGR delete kit, 2015 EGR delete kit 6.7 Powerstroke.

• From 2011–2024, our EGR delete kit for 6.7 Powerstroke engines remains a best-seller — offering cooler removal, EGR valve bypass, and tune compatibility with EZ Lynk delete kits and more.

• Dodge / RAM Cummins
  

• 5.0L, 5.9L, and 6.7L engines
• Models: RAM 2500, RAM 3500 (1998–2024)
• Popular searches: 2005 5.9 Cummins EGR delete kit, 2018 RAM 2500 full delete kit, 2022 RAM 3500 delete kit

• These are one of the best EGR Elimination Kit options for 6.7L Cummins trailers or long hauls. Also compatible with the EZ Lynk Elimination Kit tuning platform.
  

• GM Duramax

• 6.6L & 2.8L engines: LB7, LLY, LBZ, LMM, LML, L5P, LWN (2001–2024)
• Models: GMC Sierra 2500HD/3500HD, Chevy Silverado 2500HD/3500HD
• Popular searches: 2004.5 LLY Duramax delete kit, 2016 LML Duramax EGR delete and tuner, L5P full delete package

• EcoDiesel 3.0L
  

• Models: Dodge RAM 1500 EcoDiesel (2014–2018), Jeep Grand Cherokee EcoDiesel (2014–2019)
• Popular searches: RAM 1500 EcoDiesel delete kit with tuner, EcoDiesel EGR + CCV delete kit

• Sprinter Vans 3.0L (OM642)

• Models: Mercedes-Benz, Freightliner, Dodge Sprinter (2007–2016)
• Popular searches: Sprinter diesel delete kit OM642 engine, EGR delete for fleet van maintenance

Our kits are designed for clean installation, code-free operation (with tuner), and maximum engine protection—whether you're deleting just the EGR or doing a full delete (EGR + DPF + CCV).

5. Popular EGR Delete Kits Diesel Owners Trust

These top-performing EGR Delete Kits are chosen by thousands of SPELAB customers for their perfect fit, performance gains, and long-term reliability:

5.1 2006 Ford F250 / F350 6.0L Powerstroke EGR Delete Kit

✔ Fix common 6.0L cooler failures and prevent codes
✔ Often paired with tuner for check engine light removal
✔ Compatible with SCT, Bully Dog, and V2 tuning solutions

5.2 2015–2019 RAM 2500 / 3500 6.7L Cummins Delete Kit

✔ Includes 6.7 EGR valve delete + optional DPF and CCV modules
✔ Reduces backpressure and improves low-end torque for towing
✔ Popular among RV haulers and fleet operators

5.3 2017–2023 Silverado 2500HD 6.6L L5P Duramax EGR Delete Kit

✔ Custom-fit for L5P platform, supports cold air intake combos
✔ Enhanced throttle response and lower EGTs
✔ Top-selling L5P performance upgrade bundle

6. Recommended All-in-One Delete Kits for Maximum Diesel Performance

Deleting your EGR system is just the beginning. For maximum power, fuel savings, and reliability, SPELAB recommends these powerful combinations — especially popular for RAM, Duramax, Powerstroke, and EcoDiesel platforms:

6.1 EGR Delete Kit + Intake Horn (Airflow Combo)

Purpose: Improve turbo response and reduce intake restriction

• Enhances airflow to the cylinders on 6.7L Cummins and L5P Duramax

• Reduces turbo lag, increases low-end torque for heavy towing and loaded hauls

• Pairs well with cold air intake systems and turbo inlet elbows

• Often purchased with boost tube kits or high-flow intercoolers

6.2 Full Delete Kit: EGR + DPF + CCV + Tuner (Complete Emissions Delete Kit)

Purpose: Off-road diesel performance without limits

• Includes all major delete modules for a fully open diesel system
  

• Boosts MPG by up to 15%, reduces backpressure, lowers EGTs (exhaust gas temps)

• Common upgrade for fleet vehicles, race trucks, and farm-duty diesels

Available as bundle kits on product pages: just choose your engine + year.

6.3 EGR Delete Kit + Cold Air Intake + Turbo Inlet Kit (High-Efficiency Combo)

Purpose: Optimize intake temperature and combustion stability

• Designed for high-temp environments or long-haul performance builds

• Helps stabilize EGTs while boosting power at mid to high RPM

• Great for daily driving, mountain terrain, or RV towing setups

Often bundled with fuel rail plugs, block-off plates, and boost sensors for complete tuning.

7. Why Choose SPELAB? A Full Diesel Performance Ecosystem

SPELAB isn’t just a brand — it’s your diesel performance partner.

Here’s why diesel owners trust us:

7.1 Full-System Coverage

1. From EGR delete kits to DPF delete pipes, CCV reroute kits, cold air intakes, and fuel system upgrades, we support full emissions and airflow tuning for every major diesel platform — including Powerstroke, Cummins, Duramax, and EcoDiesel.
2. Whether you're building a dpf egr delete kit for your 6.7 Cummins or upgrading your setup with an EGR upgrade kit, SPELAB delivers reliable, performance-proven parts backed by expert support.
   

7.2 Expert Diesel Support
Our team understands your build — whether you're running a 6.4L Powerstroke, a 2012 LML Duramax, or a 2020 RAM EcoDiesel, we’ll help you find the ideal delete combo, including tuner compatibility and installation planning.

• 🧰 Performance-Tested Parts
  All components are tested in real-world environments — on lifted trucks, tuned rigs, heavy-duty tow vehicles, and fleet applications. We build for mileage, load, and longevity.
• 📘 Step-by-Step Installation Guides
  Every SPELAB delete kit includes detailed instructions with diagrams, torque specs, and platform-specific guidance. We also provide video tutorials and PDF manuals for most kits — whether you're installing on a 2006 F250 6.0L Powerstroke or a 2022 L5P Duramax.
  🛠️ Need help? Our support team is available to walk you through your install.
• 🛡️ After-Sales Support & Warranty
  We stand by our products with full warranty coverage, tech support, and quick part replacements. Your satisfaction is backed by real people who care about diesel performance.
• 🎁 SPELAB Member Program
  Join the club and unlock VIP discounts, early access to new delete kits, diesel build giveaways, and bundle rewards. Built for true diesel enthusiasts.

FAQ

Looking for where to buy an EGR delete kit for your truck? You’re in the right place — SPELAB offers vehicle-specific delete kits for RAM, Powerstroke, Duramax, and EcoDiesel platforms.

Q1: Is it legal to install an EGR Delete Kit on my diesel truck?
⚠️ EGR Delete Kits are intended for off-road, race, competition, or agricultural-use vehicles only. In many regions — especially California, New York, and Canada — modifying emissions systems on street-legal vehicles is illegal and may result in fines or inspection failure.
Always check your state emissions laws before installing any EGR, DPF, or CCV delete kit.

Q2: Do I need a tuner to install an EGR Delete Kit?
While some older models like 2003–2007 5.9L Cummins or LB7 Duramax may function without tuning, most modern trucks (especially 6.7L Cummins, LML Duramax, and 6.7L Powerstroke) require a tuner to prevent fault codes and ensure proper ECU behavior.
We highly recommend using EFI Live, EZ Lynk, or SCT compatible tuning when installing a delete kit.

Q3: What codes will an EGR Delete Kit fix?
Common codes that EGR deletes help resolve include:

• P0401 – EGR flow insufficient

• P0402 – EGR flow excessive

• P0405 – EGR sensor low circuit

• P2002 / P2463 – DPF soot accumulation (when combined with full delete kits)
  EGR delete kits help prevent recurring CELs and improve overall engine diagnostics.

Q4: Will deleting my EGR valve improve MPG and engine life?
Absolutely — many users report a 5–15% fuel economy improvement after removing the EGR system, especially when combined with DPF and CCV deletes.
With cleaner airflow, no hot exhaust recirculation, and reduced soot buildup, your engine runs cooler, cleaner, and more efficiently — especially on tuned Duramax and Cummins trucks.

Q5: How do I choose the right EGR Delete Kit for my truck?
Use our vehicle selector tool to match your make, model, year, and engine.
Still unsure? Contact our diesel expert support team, and we’ll recommend the right EGR delete, whether you're driving a 2006 F350 6.0L, 2018 RAM 2500 6.7L, or 2015 Silverado LML.

Q6: How much does an EGR delete kit cost?

SPELAB EGR delete kits typically range from $149 to $299, depending on your vehicle's make and model. We offer high-quality kits tailored for various diesel engines, ensuring performance, durability, and value. You can find the exact price for your vehicle by selecting the correct model on the product page.