• Installation

  • Shipping

  • Support

  • Rewards

Home > CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB
SPELAB CCV PCV reroute delete kit for 2004-2010 6.6L Duramax LLY LBZ LMM with retail box, 8ft black silicone hose, black anodized vent cap, black T-fitting, two barbed elbow fittings, plug and hose clamps
SPELAB CCV PCV reroute delete kit contents for 2004-2010 6.6L Duramax LLY LBZ LMM with translucent T-fitting, coiled 8ft silicone vent hose, black anodized cap, elbow fittings, plug and stainless hose clamps
CCV PCV reroute delete kit components for 2004-2010 6.6L Duramax LLY LBZ LMM: translucent 3-way T-fitting, 8ft black silicone hose, two flanged barbed elbow fittings, black anodized vent cap, plug and four hose clamps
Black anodized aluminum barbed CCV delete elbow fitting with mounting flange and green O-ring from the SPELAB reroute kit for 2004-2010 6.6L Duramax LLY LBZ LMM engines
Black anodized stepped CCV delete plug with green O-ring seal from the SPELAB crankcase ventilation reroute kit for 2004-2010 6.6L Duramax LLY LBZ LMM engines
Black anodized CCV reroute cap with green O-ring paired with the stock crankcase vent cap location on a 2004-2010 6.6L Duramax LLY LBZ LMM engine
Black anodized billet aluminum CCV reroute cap with white panther logo and stacked O-ring groove body from the SPELAB 2004-2010 6.6L Duramax LLY LBZ LMM delete kit
Red GMC Sierra 2500HD 6.6L Duramax diesel truck with fitment list for the CCV PCV reroute delete kit covering 2004-2010 Chevrolet Silverado and GMC Sierra 2500HD 3500HD LLY LBZ LMM
Black plastic 3-way barbed T-fitting with four stainless worm-gear hose clamps for splicing the CCV PCV reroute vent hose on 2004-2010 6.6L Duramax LLY LBZ LMM trucks
SPELAB CCV PCV reroute delete kit for 2004-2010 6.6L Duramax LLY LBZ LMM with retail box, 8ft black silicone hose, black anodized vent cap, black T-fitting, two barbed elbow fittings, plug and hose clamps
SPELAB CCV PCV reroute delete kit contents for 2004-2010 6.6L Duramax LLY LBZ LMM with translucent T-fitting, coiled 8ft silicone vent hose, black anodized cap, elbow fittings, plug and stainless hose clamps
CCV PCV reroute delete kit components for 2004-2010 6.6L Duramax LLY LBZ LMM: translucent 3-way T-fitting, 8ft black silicone hose, two flanged barbed elbow fittings, black anodized vent cap, plug and four hose clamps
Black anodized aluminum barbed CCV delete elbow fitting with mounting flange and green O-ring from the SPELAB reroute kit for 2004-2010 6.6L Duramax LLY LBZ LMM engines
Black anodized stepped CCV delete plug with green O-ring seal from the SPELAB crankcase ventilation reroute kit for 2004-2010 6.6L Duramax LLY LBZ LMM engines
Black anodized CCV reroute cap with green O-ring paired with the stock crankcase vent cap location on a 2004-2010 6.6L Duramax LLY LBZ LMM engine
Black anodized billet aluminum CCV reroute cap with white panther logo and stacked O-ring groove body from the SPELAB 2004-2010 6.6L Duramax LLY LBZ LMM delete kit
Red GMC Sierra 2500HD 6.6L Duramax diesel truck with fitment list for the CCV PCV reroute delete kit covering 2004-2010 Chevrolet Silverado and GMC Sierra 2500HD 3500HD LLY LBZ LMM
Black plastic 3-way barbed T-fitting with four stainless worm-gear hose clamps for splicing the CCV PCV reroute vent hose on 2004-2010 6.6L Duramax LLY LBZ LMM trucks

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

Checking fitment...
Selected Variant SKU: SPIS26017
$79.00
Quantity In stock

Secure and trusted checkout with

paypalvisaapple paymasteramerican expressdiscoverjcbdiners clubgoogle pay

Product Information +

3-7 Business Days Free Shipping🛈

12-Month Warranty

30-Day Return🛈

Secured Payment

Description Fitment Shipping & Returns

  • Vents crankcase blow by— decreasing oil deposits in the engine
  • No boot soak, intake gumming, etc.— increases the longevity of parts
  • Eliminates the need for the crankcase box on the top of the engine— frees up room for more activities under the hood
  • Venturi-style design— eliminates the need for restrictive baffles
  • Virtually no oil loss— no need to worry about puddles under your truck
  • Streamline routing with no angles— provides better pressure flow & no oil dripping
  • Includes ¾” 8Ft 100% silicone reinforced hose— designed for oil applications
  • Black Anodized components for better durability

SPELAB 04-10 6.6L Duramax CCV PCV ReRoute Engine Ventilation Kit listing
  • 5 stars: 22 (69%)
  • 4 stars: 9 (28%)
  • 3 stars: 1 (3%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
M
Michael Miller
Pcv reroute

Super easy and everything there. Took less than 20 minutes. Awesome product.

R
Riley Warkentin

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

J
Jonathan Watson
Pcv reroute

Product came in fast and fit right in place. I chose to not use the plastic T that came with the kit and let the hoses hand independently down on either side zip tieing them to the frame.

C
Christian Anderson

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

C
Chris Adams
Pcv reroute kit

The kit came as described but the fittings that go in valve cover I was not able to use because pass side when installed was rt in way of fuel rail pressure sensor and would not allow hose to go on
Drivers side fitting did fit but when routing hose to clear hit side of turbo neck was hard to make look clean cause
Basically the fittings need to have an angle to them not just be straight.
Also no bolts were supplied for those fittings and factory bolts were to short to work to hold fittings in place
I ended up using just the pipe ends of factory pcv and using hose supplied to rerout pcv lines.
Also the plugs that go in turbo air inlet tube were not a tight fit even with o rings
Had to use hose clamps to make sure they not come out

K
Kyle Clavier
I really don’t prefer these plugs…

The hose and pcv connectors was done and all, however I really didn’t feel comfortable using the intake caps provided. I tried multiple times but the fit seemed loose and I didn’t want to risk them blowing and end up sucking unfiltered air directly into the turbo. I opted for a 3” rubber cap with a hose band clamp and a 3/4” expansion plug from the hardware store… they won’t be going anywhere now. Kinda sad I had to spend an extra $15 to make the kit better, but the peace of mind was worth the cost.

C
CMagana Inc.

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

R
Raymond Savignac
Nice kit, poor clamps

The rocker box fittings fit nicely and appear to be of good quality. Plenty of hose supplied with the kit. The worm-clamps have an odd size hex and they bind up as you begin to tighten them. I’m using this kit with an Evil Energy catch can and venting the can to the original “suction” port on the turbo inlet mouthpiece rather than venting to atmosphere

T
Trevor Tucker
SMH

Great deal if only it came with a boot from intercooler to motor because the pipe is different and why not just make it straight instead of having it Ferrell out? Would have gave it 5 stars, if it would have had a boot!

s
sam ward

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

K
Kameron Vivant

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

F
Fred Durgeloh
Simple and effective!

Everything went together super easy, looks good, works like it should. I’ll be purchasing other parts from SPELAB in the future! Thanks!

M
Mark McDonald
Lbz ccs reroute

Easy install. Great product

K
Kirk Boxler

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

J
Justin Sullivan
Exhaust and ccv reroute kit

Exhaust kit fit like a glove sounds awsome ccv reroute kit fits great

S
Steven Bobby Sanchez

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

L
Lance Kruger
Straight Forward

Pretty much a straight forward installation.

J
Joseph W
High quality

Great kit high quality i recommend it, had issues with shipping and customer service was quick to help and resolve the issues

t
trevor smiley
Good kit

All the necessary pieces were there and functional, cheaped out with the plastic T fitting but it should work.

T
Tyler Lambert

U did not fulfilled my order still waiting for my air intake

F
Frank Adamex
Could use another hose clamp IMO

It came with 4 clamps. It also comes with a Tee fitting. So hear me out that uses three right there. iMO. It also comes with (2) fittings for the pcv. One for each side of the engine. The hoses connect onto those. There for I believe the extra hose clamp would have came in nice there

Thank you for your comment! We'll get back to the developers with your suggestions! Looking forward to receiving pictures of your installation to show!

S
Steve Easterday

Fits great easy to install. I will see how it works after I get running again.

Thanks for the review and I look forward to receiving pictures of your installation feedback!

k
kevin McCarron
Lmm pcv reroute

Kits seems good, valve cover plugs fit great.

Thanks for the review and look forward to receiving feedback on your installation!

J
Jack Newell
PCV Reroute kit

I thought the idea of rerouting PCV to be a good one. I did the install today
The installation was easy. I'm sure it will help my engine. I could see the crud built up inside intake tube where PCV connected

.

Thanks for the review and look forward to receiving pictures of your install!

T
Thomasl Rockey
Time

Haven't installed yet.

Thanks for the review and look forward to receiving pictures of your install!

S
Stephen Garib
Meh

Works but the t included feels super cheap

N
Nicholas Hall

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

A
Andrew Ford
Re route kit

Super easy kit to install and keeps oil out of the system to help the truck run cleaner.

Thanks for the review!!!Very much looking forward to your feedback pictures.

M
Matthew Glavin
good product.

thanks quick delivery good hardware

Thanks for the review!!!Very much looking forward to your feedback pictures.

J
Jeremy Boswell

CCV PCV ReRoute Delete Kit 2004-2010 6.6L LLY LBZ LMM Duramax | SPELAB

Thanks for the review!!!Very much looking forward to your feedback pictures.

R
Russell Cole

How long is the tube of this product? What is the specific length?

SPELAB

The actual measured length is 2.5Meter, about 8Ft.