2003-2025 Dodge Ram 5.9L 6.7L Cummins Oil Catch Can Installation Guide

This guide covers the installation of the Oil Catch Can for Dodge Ram 5.9L & 6.7L Diesel.

You can also download the original PDF of these installation instructions: 

SPELAB Oil Catch Can Installation

Packing Include

• 1 × OIL CATCH CAN
• 2 × FUEL HOSES
• 1 × BRACKET
• 1 × PLUG
• 2 × 90 DEGREE FITTINGS - AN12
• 2 × M6 BOLTS
• 2 × M6 SPRING WASHERS
• 3 × M10 BOLTS
• 2 × HOSE CLAMPS

Warning

Allow vehicle to cool completely prior to attempting installation. We are not responsible for any vehicle damage or personal injury due to installation errors, misuse, or removal of products.

Tools Required

• Basic hand tools and a socket set for the M6 and M10 fasteners
• Safety glasses
• Gloves and shop towels for working with the oil lines

Installation Steps

1. Disconnect Batteries
   Before beginning the installation, disconnect both the positive and negative terminals of the vehicle's batteries to prevent any electrical hazards.
2. Install the bracket
   Secure the provided bracket in the designated location within the engine bay, ensuring it is firmly attached and does not interfere with other components.
3. Connect the oil catch can to the engine block's side oil port.
   Use the provided oil hose to connect the oil catch can to the engine block's side oil port. Ensure all connections are tight and secure them with the provided clamps to prevent leaks.
4. Mount the oil catch can onto the bracket.
   Attach the oil catch can securely to the installed bracket, ensuring it is stable and properly oriented for optimal operation.
5. Connect the oil catch can to the aftermarket valve cover.
   Utilize the supplied hoses to connect the oil catch can to the aftermarket valve cover, securing all connections with the provided clamps. If there is an unused port, install a plug to seal it.
   Note: If you have installed the SPELAB valve cover, use two 90-degree fittings and appropriate hoses to connect to the valve cover. Ensure these fittings are properly tightened to prevent any leaks.
6. Verify all connections and reinstall components
7. Reconnect the batteries
   Once all components are securely installed and all connections verified, reconnect the vehicle's batteries by attaching the positive and negative terminals.
8. Final inspection
   Start the engine and inspect the oil catch can system for any signs of leaks or irregularities. Ensure that the system operates as intended.

Installation complete.

Technical Support

Technical Support:

• Email: service@spelabautoparts.com
  
  
• TEL. +1 888 301 8666