Your cart is currently empty.
Adding product to your cart
Application :
This kit is compatible with all vehicles
Note: please make sure you have enough space to install before purchase and make sure your exhaust size is same with the exhaust cutout.
Features:
1. Lightweight CNC Machined Anodized T-6061 Aircraft Aluminum Alloy
2. High Polished Finish
3 Tig Welded Construction
Details and Specifics:
Package included:
1 X Electric Exhaust Cut Out Kit with Gear Driven Motor
1 X Stainless Steel 10" Y-pipe
1 X 45-Degree Stainless Steel Elbow Dump Pipe
1 X Manual switch
1 X 12ft Wiring Harness
2 X Flange Gaskets
1 X Set of 1.50" Bolts with Lock Washers and Nuts
Hardware as Shown in the Picture Above
The material quality seems to be good. It definitely leaks exhaust, so the seal when the cutout is closed could be better. Since the 4" cutout uses a universal flange, it's very large and caused clearance issues for me. I had to modify it. A normal 3 bolt flange would be much better. I was unable to use the turn down due to ground clearance issues on my lowered car. It did bolt up just fine, but I had to take it off. That's no fault of the cutout. We'll see how well it holds up over time.
Very happy to see your comment, maybe the 4.0 size is a little bigger for your exhaust size, I can replace the 3.0 size for you for free. SPELAB wishes you a happy life
The material quality seems to be good. It definitely leaks exhaust, so the seal when the cutout is closed could be better. Since the 4" cutout uses a universal flange, it's very large and caused clearance issues for me. I had to modify it. A normal 3 bolt flange would be much better. I was unable to use the turn down due to ground clearance issues on my lowered car. It did bolt up just fine, but I had to take it off. That's no fault of the cutout. We'll see how well it holds up over time.
Very happy to see your comment, maybe the 4.0 size is a little bigger for your exhaust size, I can replace the 3.0 size for you for free. SPELAB wishes you a happy life