• Installation

  • Shipping

  • Support

  • Rewards

Home > SPELAB 2.0/2.25/2.5/3.0 OD pipe 4 Packs Butt Joint Band Clamp Exhaust Sleeve Stainless Steel Fits
Stainless butt joint band clamp 4 pack, four loose wide-strap exhaust rings each with a two-bolt reaction-block end, sized for 2" to 3" OD pipe joints.
Stainless butt joint band clamp centered around the seam where two exhaust pipes butt together, closed by bolts passing through the end force bars over the joint.
Stainless butt joint band clamp separated into its wide pre-formed ring, two hex bolts with nuts, and two reaction-block end force bars for a 2" to 3" OD exhaust joint.
Stainless butt joint band clamp fitted around a pipe, drawn tight by two high-strength plated bolts and nuts on a pre-threaded reaction block that stretches the wide bright band.
Stainless butt joint band clamp installed on the seam of two butted stainless exhaust pipes, the wide band closed by two bolts with hex nuts seated over the reaction block.
Stainless butt joint band clamp 4 pack, four loose wide-strap exhaust rings each with a two-bolt reaction-block end, sized for 2" to 3" OD pipe joints.
Stainless butt joint band clamp centered around the seam where two exhaust pipes butt together, closed by bolts passing through the end force bars over the joint.
Stainless butt joint band clamp separated into its wide pre-formed ring, two hex bolts with nuts, and two reaction-block end force bars for a 2" to 3" OD exhaust joint.
Stainless butt joint band clamp fitted around a pipe, drawn tight by two high-strength plated bolts and nuts on a pre-threaded reaction block that stretches the wide bright band.
Stainless butt joint band clamp installed on the seam of two butted stainless exhaust pipes, the wide band closed by two bolts with hex nuts seated over the reaction block.

SPELAB 2.0/2.25/2.5/3.0 OD pipe 4 Packs Butt Joint Band Clamp Exhaust Sleeve Stainless Steel Fits

$74.50
Size
Quantity In stock
SPELAB Summer Sale Take 10%Off with Code SS10

Product Information +

Secure and trusted checkout with

paypalvisaapple paymasteramerican expressdiscoverjcbdiners clubgoogle pay
Description
  • 4 pack kits specifically for dual electronic exhaust cutout, reduce false purchases.
  • Butt joint band clamps are a simple, effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • Joins 2.0''/2.25''/2.5" /3.0'' OD pipe to 2.0''/2.25''/2.5" /3.0'' OD pipe, besides, we offer you 5 different sizes and you would better measure before purchase. These fixtures use a unified structure, reduce the complexity of part numbers, and improve material efficiency to reduce weight.
  • Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.
  • The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes.
  • SPELAB provides this product to have a 12-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
  • 5 stars: 15 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
V
Valyn Grieve
Quality Product

Simple installation and making noise now. 73 years old and love the quiet while on the Hiway with the option of the sound of my 394 Hemi in town.

Valyn Grieve review photo
S
Spiro P.

Easy to install. Works great!

Spiro P. review photo
B
Brent Neathery

SPELAB 2.0/2.25/2.5/3.0 OD pipe 4 Packs Butt Joint Band Clamp Exhaust Sleeve Stainless Steel Fits

T
Thunder Smith
Bought wrong size

I bought wrong size and since I had already opened box couldn’t return

You can return the product. You can contact the customer service email to get the return address.

D
Danny H.
Very nice exhaust cut outs

I haven’t got them installed yet but they are very nicely made. My only regret is not ordering the manual switch along with the cut out kit. I think it would be more useful for my needs.

D
Darryl Evans
Good fit

Easy to install great

Thank you for your comment! Looking forward to receiving feedback on your install!

b
bob zeuli
Cut outs

Amazing quality

Thank you for your comment and look forward to receiving feedback on your installation!

n
nick coppola

SPELAB 2.0/2.25/2.5/3.0 OD pipe 4 Packs Butt Joint Band Clamp Exhaust Sleeve Stainless Steel Fits

R
Rodney Spolarich
3” band clamps

Nice snug fit , work great.

C
Chad M.

Very good product seems well build .

C
Customer

Very nicely made

J
John Dalcerro

The service is great The product is great

N
Nelson Fried

Everything worked fine just could not get the clamps to seal the pipes had to go to shop an have then welded

d
don johnson

a+ outfit great product and shipping damaged a clamp and they had me a new one immediately.

J
John F.

I purchase these exhaust bands to temporarily install the cutouts until I decided whether or not I liked them, and then weld them after. They worked so good that I left them on without welding them in case I decide to sell my vehicle and then remove them without having to chop up my exhaust. Thank You Spelab for another fine product. Sincerely, John Flynn@Flynnys Customs

M
Marcos

Could I hard wire this instead of the Cigarette lighter?

SPELAB

Of course you can, but remind you to pay attention to the safety of electricity

Let customers speak for us

from 6133 reviews
4'' DPF Back Exhaust Single Side Exit 2011-2016 6.7L Powerstroke Ford F250 F350 F450
Johnny P
Fit Great!

Fit great! If you have a short bed, you have to cut the pipe shorter but other than that it was easy! Sounds awesome as well!

4'' DPF Back Exhaust Single Side Exit 2011-2016 6.7L Powerstroke Ford F250 F350 F450
SPELAB 2011-2019 Ford 6.7L Powerstroke EGR Cooler Delete Kit
Anonymous
Works

Works great

SPELAB 2011-2019 Ford 6.7L Powerstroke EGR Cooler Delete Kit
3.5" Intake Manifold with Heating Element for 2007-2024 Dodge Ram 2500/3500 6.7L Diesel | SPELAB
Matthew J
super easy and worth the money

took like 2 hours to do with all the right tools and has much better throttle response. would highly recommend!!

3.5" Intake Manifold with Heating Element for 2007-2024 Dodge Ram 2500/3500 6.7L Diesel | SPELAB
Differential Cover 10.25'/10.5' 12 Bolts for Ford 1986-2024 Ford F250 F350 | SPELAB
Haden Holaway
SPELAB 12 Bolt Differential Cover

Have had the differential cover on for almost a week now and have had zero issues. The cover looks very nice and I now having the drain & fill plugs and the sight glass will make fluid changes a lot easier. Only recommendation would be to swap from Allen head bolts to regular ones as they are a bit easier to torque but other than that love it. FYI for anyone wondering I torqued all my bolts to 22 ft/lbs and have had zero leaks, couldn't find an exact torque spec but this seems to suffice!

Differential Cover 10.25'/10.5' 12 Bolts for Ford 1986-2024 Ford F250 F350 | SPELAB
Worry-Free Purchase
Gabe Potter
Great for the price

Great for the price and pretty simple install. Did have to modify one bracket but other than that it was a slick install and great product

Worry-Free Purchase
3.5" Intake Manifold with Heating Element for 2007-2024 Dodge Ram 2500/3500 6.7L Diesel | SPELAB
Jack
This Fits With Stock Fuel Line

I got burned with a Banks manifold when their #1 proprietary fuel line split on me. This manifold takes care of that! It was an easy swap out, and worked with the banks plate.

3.5" Intake Manifold with Heating Element for 2007-2024 Dodge Ram 2500/3500 6.7L Diesel | SPELAB
Intake Manifold for 2011–2019 Ford F250 F350 F450 F550 6.7L Powerstroke | SPELAB
Chris Potratz
Great Product

Great Product. Quality seems really good too.

Intake Manifold for 2011–2019 Ford F250 F350 F450 F550 6.7L Powerstroke | SPELAB
3.5" Intake Manifold with Heating Element for 2007-2024 Dodge Ram 2500/3500 6.7L Diesel | SPELAB
Dezi Parnell
Pusher intake horn

Bought a intake manifold from spelab for my 3500 6.7 cummins, and it works perfect, shipping was fast all parts included. Great company to deal with, highly recommended.

3.5" Intake Manifold with Heating Element for 2007-2024 Dodge Ram 2500/3500 6.7L Diesel | SPELAB
Intake Manifold for 2011–2019 Ford F250 F350 F450 F550 6.7L Powerstroke | SPELAB
Daulton Amick
Good quality

Installation was easy

Intake Manifold for 2011–2019 Ford F250 F350 F450 F550 6.7L Powerstroke | SPELAB
For 4''/5'' DPF Delete Race Pipe for 2013-2018 Dodge Ram 2500/3500 6.7 Diesel | SPELAB
Dalton Richards
Absolutely perfect fit and easy to install!

Absolutely perfect fit! Super easy to install did move gasket from downpipe to DPF and reused but overall extremely pleased!

For 4''/5'' DPF Delete Race Pipe for 2013-2018 Dodge Ram 2500/3500 6.7 Diesel | SPELAB
EGR Delete Kit For 2011-2025 Ford 6.7L Powerstroke Diesel F250 F350 F450 F550 | SPELAB
Dallon
Does the job

I bought the Chinese knock off because SPE Motorsports won’t sell it. As advertised. I’m sure it’ll do.

EGR Delete Kit For 2011-2025 Ford 6.7L Powerstroke Diesel F250 F350 F450 F550 | SPELAB
SPELAB Cold Air Intake Kit For 2007.5-2012 Dodge Ram 6.7L Diesel Ram 2500 3500 4500 5500
Anonymous
Purchased for my 2011 ram 2500 6

Purchased for my 2011 ram 2500 6.7 Cummins. Great product all the sensors holes lined up perfectly helped with acceleration a lot more responsive now on acceleration

SPELAB Cold Air Intake Kit For 2007.5-2012 Dodge Ram 6.7L Diesel Ram 2500 3500 4500 5500
SPELAB Cold Air Intake Kit For 2007.5-2012 Dodge Ram 6.7L Diesel Ram 2500 3500 4500 5500
Caleb
Installed on a 14 3500, seamless install

Installed on a 14 3500, seamless install maybe takes 10min. Definitely opens intake up. Noticeably more sound. Not sure any performance gains other than throttle response

SPELAB Cold Air Intake Kit For 2007.5-2012 Dodge Ram 6.7L Diesel Ram 2500 3500 4500 5500
Intake Manifold for 2011–2019 Ford F250 F350 F450 F550 6.7L Powerstroke | SPELAB
Dennison Collard
Full delete

I’ve purchased the EGR and CCV deletes as well as the upgraded intake manifold, upper radiator hose and thermostat block, and compressed air piping. Overall I am very satisfied with the quality and fit of all of the parts. Some of the instructions could use a little more detail, but if you are in any way mechanically inclined, you’ll be able to do these yourself no problem. I did have to make a very small modification to the aluminum quick connector on the upper radiator hose in order to get it to lock in place, but other than that everything has been great!

Intake Manifold for 2011–2019 Ford F250 F350 F450 F550 6.7L Powerstroke | SPELAB
Worry-Free Purchase
Conner Burch

Works amazing and easy to install

Worry-Free Purchase