3" Y-Bridge Cold Side Intercooler Pipe for 2006-2010 6.6 Duramax LBZ LMM | SPELAB
Adding product to your cart
- Description
- Review + Q&A
3" Y-Bridge Cold Side Intercooler Pipe for 2006-2010 6.6 Duramax LBZ LMM | SPELAB
Details and Specifications:
- Brand: SPELAB
- SKU: SPIS08115
- Color: Black
- Type: 3" Cold Side Intercooler Pipe & Y-Bridge Kit
- Aftermarket Performance Intercooler & Y-Bridge System For 2006 2007 2008 2009 2010 6.6 LBZ LMM Duramax Diesel
Package includes:
- 1 x Y-Bridge
- 1 x Cold Side Intercooler Pipe
- 2 x Silicone Boot
- 6 x T-Bolt Clamp
- 1 x 5/8" Heater Hos
Fitment:
- 2006 6.6L LBZ Duramax Diesel
- 2007 6.6L LBZ Duramax Diesel
- 2007.5 6.6L LMM Duramax Diesel
- 2008 6.6L LMM Duramax Diesel
- 2009 6.6L LMM Duramax Diesel
- 2010 6.6L LMM Duramax Diesel
- LBZ: 06-07 VIN Code 2 or D
- LMM: 07.5-10 VIN Code 6
Features:
The turbocharger not only generates pressure, but also generates heat in the process. Once the sum of heat and pressure exceeds the level that the plastic intercooler pipe can withstand, it will rupture. Therefore, aluminum alloy pipes are used for upgrading.
Silver Pipe & Black Silicone Connection Tube Upgrade from factory plastic tube
Silver Pipe: Constructed of mandrel-bent aluminum with a polished finish. A 100% CNC-machined 6061 aluminum coupling allows you to retain your trucks factory emissions components and allows for a quick install.
Silicone Connection Tube: Triple Reinforced Silicone Able to Withstand High Heat and Pressure, Will Reduce Vibration Transfer Due to Hard Impact Shifting or Engine movement
3" Y-Bridge Cold Side Intercooler Pipe for 2006-2010 6.6 Duramax LBZ LMM | SPELAB
Thanks for the review!!!
I finally received the package containing the Y-Bridge pipe kit. It came to the wrong address thanks to FedEx. It took me 4 days to track it down and then I had to go pick it up. Then I had to drive 50 miles to a neighboring county to purchase the square gaskets for the Y-Bridge pipe itself. It definitely would have been more helpful if they came with the kit I ordered from your company. Overall, the Y-Bridge kit was just what my truck needed. The extra stress however was not what I needed.
Hello. I'm very sorry. Provided you with an unpleasant shopping experience. You can contact SPELAB's email to receive compensation gifts.
Bolt holes for the y bridge did not line up. Had to drill them out to aline. Also high flow elbow did not line up. Was a little off. Had to cut and re-weld. Clamps are vary cheep as well. But still saved me over $600 then buying a name brand one.
Hello. I have already provided feedback to the product development department regarding the issue you raised. I am very sorry for the unpleasant shopping experience you had.
Fit lbz great! Lmm seems the intercooler pipe hits Altinator stud hard
Thank you for your review!
The y bridge fit fine, but the cold side pipe doesn’t line up super well. It is off alignment with the y bridge by about .5-1” which the silicone boot makes up for barely. The clamps are also super cheap and probably should be replaced with actual 3” t band clamps that can be cranked down without the clamp distorting and breaking. But overall for the price it’s a decent kit.
Thank you very much for your review, I am very happy that you had a pleasant shopping
First off the Y bridge install is a pain. The bridge fit pretty good. The neck I did have to add some rtv to make a good seal. The cold pipe I felt didn’t line up totally. I was able to make it work. I’m wondering if a different elbow than the stock one coming off the intercooler would make it a better connection.
Very happy with the quality for the price of this kit. Excited to get it installed on my truck.
part came in on time and looks great an helps my duramax perform way better an I don't have to worry about blowing o rings off everytime I build boost