EGR/CCV Reroute/Tuner/ Delete 2007.5-2010 LMM 6.6L Duramax All-in-One Kit |SPELAB

⚠️Note: Tuner V3 is a custom product and cannot be returned or exchanged. Please double-check before purchasing. Thank you!

Key Features

• Free-flowing exhaust system for more power and better fuel economy
• Improved combustion chamber temperatures
• Better longevity of your engine's cooling and exhaust system
• Increased power from more powerful tune flashes
• All the necessary parts needed to fully delete your 2007.5-2010 LMM 6.6L Duramax

What's in the Box

• Tuner
• EGR Delete Kit
• CCV Reroute Kit
• Downpipe Exhaust
• Up-Pipe

⚠️Note: Accessories vary by order and may not include all listed.

Important Notice

This product is intended for off-road and race applications only. Removing the DPF may violate emissions regulations; ensure you understand local laws and regulations before installation.

AutoCal Update & Installation Instructions

Please use your USB cable and upload the new offroad calibration to your AutoCal using your WINDOWS 10+ PC.

Required Software & Manuals:

• The software you require from EFILive can be found here:
  https://www.efilive.com/download-efilive
• The user manual for the EFILive AutoCal v3 can be found here:
  AutoCal V3 User Guide (PDF)
• Video tutorial (if written instructions aren't clear enough):
  Watch Video on YouTube

⚠️ IMPORTANT: FIRMWARE UPDATE

PLEASE UPDATE YOUR AUTOCAL FIRMWARE PRIOR TO LOADING YOUR NEW OFF-ROAD TUNE FILE. NOT DOING SO MAY CAUSE COMPATIBILITY ISSUES AND DAMAGE YOUR ECM.

1. Select "Check for Updates" on the EFILive V8 Scan and Tune software homepage. If your software is out of date, please select the option to update.
2. Select "Check Firmware" on the EFILive V8 Scan and Tune software homepage. On this window, please choose the option to update the Firmware Version and the Configuration Files.

Once these steps are completed, you should be able to now re-program your AutoCal device.

AutoCal Reprogramming Instructions

PLEASE USE EFILIVE SCAN AND TUNE, AND NOT EXPLORER UNLESS TOLD TO.

Program Quick Setup

The Quick Setup is the quickest and easiest way to program all files required to make AutoCal functional. This method requires your tune provider to send you a *.bbx quick setup file via email.

1. Save the *.bbx file your tuner sent to the folder:
   \Documents\EFILive\V8\BBX (Or, in your Downloads/Desktop folder)
2. Connect AutoCal to your PC and open V8 Scan and Tune software.
3. Navigate in the V8 software to:
   [F5: BBX] -> [F6: Quick Setup]
4. Select [Open Quick Setup] and navigate to the directory and select the *.bbx file your tune provider sent you.
5. Do not modify any of the settings defined by your tune provider unless they request you to.
6. Select [Program Quick Setup] to program device settings, controller configuration, and tune files to your AutoCal.

*If you have a 2018+ Cummins off-road vehicle, please remember to install the bypass cable prior to re-flashing your truck*

Note: Ensure you are not altering any electronic accessory during the flashing process, this includes the radio, opening and closing doors, rolling down the window, etc.

Please use your USB cable and upload the new offroad calibration to your AutoCal using your WINDOWS 10+ PC.

The software you require from EFILive can be found here:

https://www.efilive.com/download-efilive

The user manual for the EFILive AutoCal v3 can be found here:

https://content.efilive.com/documents/AutoCal%20V3%20User%20Guide.pdf

Here is a video on uploading the tune files as well, incase the written instructions aren't clear enough.

https://www.youtube.com/watch?v=hJ7yu3QoRnQ

Please update your autocal firmware prior to loading your new off-road tune file. Not doing so may cause compatibility issues and damage your ecm:

1) Select "Check for Updates" on the EFILive V8 Scan and Tune software homepage. If your software is out of date, please select the option to update.

2) Select "Check Firmware" on the EFILive V8 Scan and Tune software homepage. On this window, please choose the option to update the Firmware Version and the Configuration Files.

Once these steps are completed, you should be able to now re-program your AutoCal device.

AutoCal Reprogramming Instructions Overhead:

PLEASE USE EFILIVE SCAN AND TUNE, AND NOT EXPLORER UNLESS TOLD TOO.

Program Quick Setup

The Quick Setup is the quickest and easiest way to program all files required to

make AutoCal functional.

This method requires your tune provider to send you a *.bbx quick setup file via email.

1. Save the *.bbx file your tuner sent to the folder:

\Documents\EFILive\V8\BBX (Or, in your Downloads/Desktop folder)

2. Connect AutoCal to your PC and open V8 Scan and Tune software.

3. Navigate in the V8 software to [F5: BBX]->[F6: Quick Setup]

4. Select [Open Quick Setup] and navigate to the directory and select the

*.bbx file your tune provider sent you.

5. Do not modify any of the settings defined by your tune provider unless they request

you to.

6. Select [Program Quick Setup] to program device settings, controller

configuration and tune files to your AutoCal.

*If you have a 2018+ Cummins off-road vehicle, please remember to install the bypass cable prior to re-flashing your truck*

Ensure you are not altering any electronic accessory during the flashing process, this includes the radio, opening and closing doors, rolling down the window, etc.

Installation

2018-2021 Cummins Bypass Cable Installation
CUMMINS CCV SOTF Switch Install
DSP5 Installation Help
EFILive AutoCal Vehicle Install Instructions

• 2007.5-2010 GMC Sierra 2500 3500 HD 6.6 LMM Duramax Diesel
• 2007.5-2010 Chevrolet Silverado 2500 3500 HD 6.6 LMM Duramax Diesel

If you own a LML engine, Check out our All-in-One LML Duramax Delete Kit (includes EGR, DPF, DEF, and CCV deletion with a tuning device).