The SPELAB one-piece dual electric exhaust cutout kit adds two bypass outlets to compatible exhaust piping, using one wireless remote and a shared controller to adjust the valve openings for a louder exhaust note or close the valves to route exhaust through the original downstream exhaust system.
Each integrated pipe-and-valve assembly arrives assembled, reducing the number of separate components you need to fit. The kit includes two cutout assemblies, one controller, one wireless remote, an electrical Y-splitter and two wiring harnesses. Choose the pipe size that matches your exhaust and check space for both assemblies before purchase.
One-Piece Cutout Demonstration
The video demonstrates the one-piece cutout design; this dual kit includes two assemblies. Actual exhaust sound varies with engine, vehicle condition, exhaust configuration and installation location. Recording and playback equipment also affect what you hear.
One-Piece Construction, Shared Remote Control
Two integrated cutout assemblies: The pipe sections, valves and bypass outlets arrive assembled, reducing separate component assembly during installation.
One controller for both valves: The wireless remote operates the shared control system through the electrical Y-splitter and two harnesses.
Adjustable valve openings: Use the remote to adjust the opening angle, open the bypass outlets or close the valves to return exhaust flow to the downstream system.
304 stainless steel piping: Corrosion-resistant piping for an underbody exhaust installation.
Aluminum alloy valve construction: Electric motors operate the bypass valves.
Thickened exhaust outlets: Reinforced outlet construction supports durability at the bypass openings.
Choose by Pipe Size and Available Space
Size options are 2.0, 2.5 and 3.0 inches. Match the actual exhaust pipe dimensions and connection arrangement, then check clearance for both complete assemblies, their motors and the wiring routes. Tight exhaust routing or a low chassis can prevent a suitable installation.
This dual kit suits a compatible exhaust layout that needs two controlled bypass outlets. Inspect the main exhaust runs at the planned installation points; the number of tailpipe tips does not determine how many cutouts are needed.
Product Specifications
Specification
Details
Brand
SPELAB
Configuration
Two one-piece electric exhaust cutout assemblies
Pipe size options
2.0 / 2.5 / 3.0 inches; confirm the actual pipe connections
Control method
One wireless remote and one shared control unit
Valve adjustment
Adjustable opening angle
Pipe material
304 stainless steel
Valve material
Aluminum alloy
Weight
4700 g / 5220 g, depending on version
Cutout operating temperature
0 degrees C to 150 degrees C
Power connection
12V cigarette-lighter power plug
Wiring
Two wiring harnesses and one electrical Y-splitter
Package Contents
2 one-piece electric exhaust cutout assemblies, each with one valve and motor
1 wireless remote
1 shared control unit with cigarette-lighter power plug
1 electrical Y-splitter
2 wiring harnesses
The Y-splitter is an electrical wiring adaptor. Main-pipe installation band clamps are not included; welding or compatible separately obtained clamps are required to connect the assemblies to the existing exhaust.
Integrated Cutout Installation
Professional installation is recommended. The one-piece design reduces component assembly, but fitting both cutouts still requires exhaust cutting, secure pipe connections and protected wiring routes.
Tools and Installation Materials
Vehicle lift or correctly rated jack stands and wheel chocks
Tape measure and marker
Exhaust cutting tool and file or deburring tool
Socket and wrench set
Welding equipment for a welded installation, or suitable separately obtained butt-joint or lap-joint exhaust band clamps for compatible pipe connections
Safety glasses, gloves and suitable cutting or welding protection
Heat-resistant wiring supports and protection for any body-panel pass-through
Installation Steps
Plan both installation locations: Let the exhaust cool and support the vehicle securely. Choose a suitable section on each exhaust run upstream of the muffler, while keeping the catalytic converters, emissions equipment and required oxygen sensors in their original exhaust path. Check clearance for each complete assembly and its motor, including ground clearance and suspension movement. Plan the outlet direction and wiring route.
Measure and mark the cuts: Test-position each one-piece assembly and confirm its exhaust-flow direction. Measure the actual part and the welded or clamped joint arrangement, then mark the section of the existing pipe to remove. Determine cut length from the actual assembly and joint overlap rather than the nominal pipe diameter.
Cut and prepare the main pipes: Cut the marked sections with a suitable exhaust cutting tool. Remove burrs and sharp edges, clean the joints and check alignment before making permanent connections.
Fit the integrated cutout assemblies: Have a qualified installer weld the pipe connections, or secure compatible pipe ends with suitable separately obtained butt-joint or lap-joint band clamps. Keep each motor clear of the body and nearby components, support the exhaust without forcing it out of alignment and direct the bypass outlet away from fuel lines, brake lines, wiring and heat-sensitive or flammable material.
Connect the shared control system: With the power plug disconnected, connect the two motor leads through the two wiring harnesses and electrical Y-splitter to the single control unit. Route and secure wiring away from exhaust heat, moving parts and sharp edges, and protect any body-panel pass-through. Mount the control unit in a protected location inside the vehicle and connect the supplied power plug to a compatible 12V cigarette-lighter socket.
Test and inspect: Keep hands and tools clear of both valves and check their operation with the wireless remote. Release the remote button when the valves reach the fully open or closed position. Start the engine in a well-ventilated area, inspect the connections for leaks and confirm outlet direction, wiring security and clearance. Recheck the installation after the first heat cycle.
These illustrations show possible positioning. Select each installation location by the actual exhaust routing, required emissions equipment, outlet direction and available clearance.
Avoid operating the electric cutouts in heavy rain or extremely cold weather. Temperatures below -5 degrees C may cause the valves to stick. Do not force the motors if a valve will not move, and release the remote button at the fully open or closed position.
Why Choose This SPELAB One-Piece Kit?
This dual kit combines two integrated cutout sections with one wireless control system. The one-piece design reduces separate component assembly, while the shared controller gives you a single remote for both bypass valves.
Materials and Outlet Construction
304 stainless steel piping provides corrosion resistance, and the aluminum alloy valve construction works with the motor-driven opening adjustment. The thickened bypass outlets add material at exposed exhaust openings.
Exhaust heat cycles, road moisture, vibration and debris all affect underbody components. Secure pipe connections, protected wiring and regular clearance checks help support durability.
A Fit for Custom Dual Exhaust Projects
A compatible custom exhaust can use the two bypass outlets for selectable exhaust sound while retaining the original downstream route when the valves close. Choose this configuration when the installation needs two cutout sections controlled through one remote system.
Frequently Asked Questions
What does one-piece mean on this dual exhaust cutout kit?
Each one-piece assembly combines the Y-pipe, electric valve and bypass outlet into an assembled section. The kit includes two of these sections. Installation still requires cutting and connecting them to the existing exhaust pipes.
Does one controller operate both exhaust valves?
The single control unit connects to both electric valves through the electrical Y-splitter and two wiring harnesses. One wireless remote operates the shared control system.
Can I adjust the valve opening angle?
The wireless remote lets you adjust the valve opening angle. Release the remote button when the valves reach the fully open or closed position; do not continue driving the motors against the end positions.
Is the Y-adaptor an exhaust pipe fitting?
The included Y-adaptor is an electrical splitter that connects the two valve wiring harnesses to one control unit. The kit also includes two complete one-piece exhaust cutout assemblies.
How do I choose the correct size?
Choose the 2.0, 2.5 or 3.0-inch option that matches the actual exhaust pipe connections. Confirm the pipe-end arrangement and space for both complete assemblies and their motors before purchase; vehicle make and model alone do not establish compatibility.
Can I install the one-piece cutouts without welding?
Suitable butt-joint or lap-joint exhaust band clamps can be used when the actual pipe ends and connection arrangement are compatible. Main-pipe installation clamps are not included. A qualified installer should select the connection method and check joint security and sealing.
What happens when the valves are closed?
Closing the bypass valves routes exhaust through the original downstream exhaust system. Opening the valves allows exhaust to exit through the bypass outlets for a louder exhaust note.
Will my vehicle sound exactly like the video?
The video demonstrates the one-piece cutout design. Actual sound varies with engine, vehicle condition, exhaust configuration and cutout location; recording and playback equipment also affect the sound you hear.
Should I operate the cutouts in heavy rain or extreme cold?
Avoid operating the electric cutouts in heavy rain or extremely cold weather. Temperatures below -5 degrees C may cause the valves to stick; do not force the motors if a valve will not move.
Does closing the valves make the exhaust modification compliant for road use?
Closing the valves does not by itself establish compliance. Check the applicable exhaust noise, emissions and vehicle-use requirements before installation or use, and retain the required emissions equipment and sensors.
Fast Shipping Policy
Your order will be dispatched within 1–2 business days,
and your package will arrive within the estimated delivery window shown
at checkout.
View Shipping Policy
Easy 30-Day Return Policy
You may request a return or exchange within 30 days of delivery.
Items must be returned in their original, undamaged condition. Return shipping
costs are the customer's responsibility. For damaged, incorrect, or defective
items, please contact us as soon as possible for assistance.
Warranty Update: DPF Delete Kits purchased on or after Nov 17 come with a 2-year warranty. All other items remain covered by a 1-year warranty.
View Return Policy
5 stars: 6 (75%)
4 stars: 2 (25%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)
A
Aaron
Work great
Both valves work perfectly from the single remote. Good build quality and easy to install by any custom muffler shop.
G
Gary Williams
Good product for the money
T
Travis
Great Product
Built very well, exactly what I was looking for
K
Kevin Nering
Exhaust Cut Outs
Ordering was easy and shipping was fast. I haven't installed them yet but the quality seems good.
Thanks for the review and I look forward to receiving pictures of your installation feedback!
R
Ronnie Olson
great product, only 1 minor issue
I purchased part# SPES01134S2.0. You need the part number for this review to make sense. Overall, the cutouts worked for the 1970 Camaro i installed them on. I had plenty of ground clearance because of the smaller motor design. The only downside is that the thick housing that the butterfly resides in, does not offer an easy way to add an extension pipe to direct the exhaust in another direction. I understand the reason for the thick housing, heat, warpage etc but a piece of tubing pr-attached would be nice so you could have the option of adapting to it in an easy fashion.
Thank you for your suggestion. SPELAB will continue to optimize this product. I hope to continuously improve product quality to satisfy customers.
m
mariano cueto
awesome
awesome
T
Tom Clark
Good looking product.
It’s a very good looking product I haven’t put it on yet but I will soon.
D
Dwayne C.
Ya'll need to get a different shipper. It took 2.5 weeks to get to me. DHL sucks!! Sat in Illinois for 3 days. Then they pass it off to USPS. That's like stabbing a sail in the box and throwing it in the nearest river. Like the product though!!
M
Mark
How can I open it partially. Please. If I need to open half way
SPELAB
Thank you for your inquiry. The configuration features a point-control remote. Pressing the remote once opens it to a specific angle, while a long press opens it fully. Closing it follows the same principle. For further information, please contact us at: (service@spelabautoparts.com).
C
Customer
What is material used? Metal? Can I use Mig Flux wire to weld?
Instead you Recommend your Clamps for 100%seal?
Do your cut offs have O-Ring seal for 100% seal too?