Wheel Spacers for 1964-2014 Ford Mustang / Lincoln / Mazda / Mercury 4PCS
PLEASE NOTE!- Description
- Review + Q&A
Wheel Spacers for 1964-2014 Ford Mustang / Lincoln / Mazda / Mercury 4PCS
Fitment：
- Ford
1964-1973 Ford Mustang
1979-2014 Ford Mustang
1983-2012 Ford Ranger
1991-2005 Ford Explorer
2007-2010 Ford Explorer
1992-2011 Ford Crown Victoria
2001-2010 Ford Explorer Sport Trac
2007-2010 Ford Edge
- Lincoln
1981-2011 Lincoln Town Car
2003-2005 Lincoln Aviator
- Mazda
1998-2001 Mazda B2500
1994-2008 Mazda B3000
1994-2010 Mazda B4000
1991-1994 Mazda Navajo
- Mercury
1997-2010 Mercury Mountaineer
Features:
SPELAB Wheel spacers are used to widen the track width of a vehicle by creating additional space between the wheel and the hub assembly. Some potential benefits of using wheel spacers include:
1. Improved Appearance: Wheel spacers can give your vehicle a wider stance, which can enhance the overall appearance of the vehicle.
2. Better Handling: A wider track width can improve handling by increasing stability and reducing body roll, particularly in high-speed turns.
3. Clearance for Larger Wheels or Brakes: Wheel spacers can create additional clearance between the wheel and brake caliper, allowing for the installation of larger wheels or brakes.
4. Correcting Offset: If your wheels have an incorrect offset, wheel spacers can be used to adjust the positioning of the wheel for better fitment.
It is important to note that using wheel spacers can also have some potential drawbacks, such as increased stress on the wheel bearings and suspension components, and potential rubbing against fenders or other components. It is important to properly install and maintain wheel spacers to minimize these risks. It is also important to ensure that the wheel spacers you choose are compatible with your vehicle and intended use.
Installation Note:
Step 1: Don't use an impact wrench. Use a jack or lift to raise the vehicle so that the tires are in the air.
Step 2: Remove the wheels/tires
Step 3: Spray degreaser on lug studs
It's not required, but it's a good idea. You want to make sure the wheel spacers are resting on a clean, smooth surface. If there is rust or corrosion, take a wire brush and clean it.
Step 4: Put the wheel spacers in place
Tighten by hand, but do not tighten the bolts. Just snap them all into place and tighten slightly.
Step 5: Tighten the bolts according to the specification
Once all the bolts are in place, use a torque wrench to tighten them to the manufacturer's recommended specifications.
Step 6: Reinstall the wheel onto the assembly/lug studs
Secure and hand-tighten each lug nut before tightening them all the way down. Tighten them in a star pattern to ensure the load is not applied unevenly.
