Wheel Spacers for 2014-2022 Dodge Ram / 1988-2013 Chevrolet Silverado GMC 4PCS

Wheel Spacers for 2014-2022 Dodge Ram / 1988-2013 Chevrolet Silverado GMC 4PCS | SPELAB

Fitment :

• Dodge

2014-2022 Dodge Ram 2500
2014-2022 Dodge Ram 3500
2014-2018 Dodge Ram 3500 DUALLY

• Chevrolet

1999-2010 Chevrolet Silverado 2500
1999-2010 Chevrolet Silverado 3500
2000-2010 Chevrolet Silverado DUALLY 3500
1989-2013 Chevrolet Silverado SUBURBAN 2500
1988-2000 Chevrolet Silverado K-2500
1988-2000 Chevrolet Silverado K-3500
1988-2000 Chevrolet Silverado 20 PICKUP 2WD HD
1988-2000 Chevrolet Silverado C-30 PICKUP 2WD
2002-2007 Chevrolet Silverado AVALANCHE 2500

• GMC

1988-2000 GMC C-2500 PICKUP 2WD
1988-2000 GMC C-3500 PICKUP 2WD
1988-2000 GMC K-2500 PICKUP 4WD
1988-2000 GMC K-3500 PICKUP 4WD
1997-2000 GMC SAVANA VAN 2500
1997-2000 GMC SAVANA VAN 3500
2001-2010 GMC SIERRA 2500 HD
1999-2010 GMC SIERRA 3500
1999-2010 GMC SIERRA DUALLY 3500
2000-2013 GMC YUKON 2500

• HUMMER

ALL HUMMER H1
2003-2010 HUMMER H2

Features:

SPELAB Wheel spacers are used to widen the track width of a vehicle by creating additional space between the wheel and the hub assembly. Some potential benefits of using wheel spacers include:

1. Improved Appearance: Wheel spacers can give your vehicle a wider stance, which can enhance the overall appearance of the vehicle.

2. Better Handling: A wider track width can improve handling by increasing stability and reducing body roll, particularly in high-speed turns.

3. Clearance for Larger Wheels or Brakes: Wheel spacers can create additional clearance between the wheel and brake caliper, allowing for the installation of larger wheels or brakes.

4. Correcting Offset: If your wheels have an incorrect offset, wheel spacers can be used to adjust the positioning of the wheel for better fitment.

It is important to note that using wheel spacers can also have some potential drawbacks, such as increased stress on the wheel bearings and suspension components, and potential rubbing against fenders or other components. It is important to properly install and maintain wheel spacers to minimize these risks. It is also important to ensure that the wheel spacers you choose are compatible with your vehicle and intended use.

Installation Note:
Step 1: Don't use an impact wrench. Use a jack or lift to raise the vehicle so that the tires are in the air.
Step 2: Remove the wheels/tires
Step 3: Spray degreaser on lug studs
It's not required, but it's a good idea. You want to make sure the wheel spacers are resting on a clean, smooth surface. If there is rust or corrosion, take a wire brush and clean it.
Step 4: Put the wheel spacers in place
Tighten by hand, but do not tighten the bolts. Just snap them all into place and tighten slightly.
Step 5: Tighten the bolts according to the specification
Once all the bolts are in place, use a torque wrench to tighten them to the manufacturer's recommended specifications.
Step 6: Reinstall the wheel onto the assembly/lug studs
Secure and hand-tighten each lug nut before tightening them all the way down. Tighten them in a star pattern to ensure the load is not applied unevenly.