SPELAB Diesel Exhaust Fluid Heater Kit DEF BC3Z5J225KA Fits 2011-2016

cart Cart 0
Shopping Cart:
Zoom the image with the mouse

SPELAB Diesel Exhaust Fluid Heater Kit DEF BC3Z5J225KA Fits 2011-2016 Ford F250 F350 F450 F-550 Super Duty SPELAB Diesel Exhaust Fluid Heater Kit DEF BC3Z5J225KA Fits 2011-2016 Ford F250 F350 F450 F-550 Super Duty

In stock
SPES27001
SPELAB
$202.33
$202.33
This product belongs to the technical field of diesel vehicle exhaust gas after-treatment supply system, and uses vehicle ureauff08urea will decompose into ammonia at a certain temperatureuff09to preform selective catalyze the reduction of nitrogen oxides(NOX), to achieve energy-saving and at same time emission reduction.

Specifications:
  • Brand: SPELAB
  • SKU: SPES27001
  • Weight: 1480g
  • Replaces Part Numbers: BC3Z5J225KA,BC3Z5J225L,904372,Dorman 904-372
  • Function: Coordinate with Urea pump to output Vehicle Urea. Heat up Urea solution. Liquid sensor signal output. Temperature sensor signal output. Vapour filtration. Urea solution filtration.
Fitment:
  • 2011-16 Ford F250 Super Duty Truck V8 6.7L Turbo Diesel Exhaust Fluid Reservoir Heater
  • 2011-16 Ford F350 Super Duty Truck V8 6.7L Turbo Diesel Exhaust Fluid Reservoir Heater
  • 2011-16 Ford F450 Truck V8 6.7L Turbo Diesel Exhaust Fluid Reservoir Heater

If your diesel vehicle is confined to a limited speed, or in power reduction mode, a common culprit may be a failed original DEF Heater.
Properly functioning DEF Heaters are required in most states for vehicle inspection.
High-quality plastic construction for added durability.
Complete kit: includes all necessary gaskets and o-rings needed for a complete replacement.
Ford Truck / F250 Super Duty 2011-2015 (Engine: 6.7L V8 Diesel)
Ford Truck / F350 Super Duty 2011-2015 (Engine: 6.7L V8 Diesel)

Method of installation:
  • u2460Remove the oil outlet dust cover and return oil outlet dust cover on the flange, and then insert the oil seal ring and the return oil ring.
  • u2461Install the top seal ring into the urea tank.
  • u2462Install the Pre-heater into the urea tank and rotate it to the right by 10u00b0tolock the oil tank firmly.Then press the top cover into the urea tank port,and press it tightly with the seal ring of the top cover.
  • u2463Screw the flange plate to fix the top cover.
  • u2464Install Urea pump assembly.
  • u2465Connect vapour filtration lines,wiring plugs,etc.Use Ribbon to fasten the wiring
  • u2466After all installed,it needs to meet certain conditions to make system work,so directly using computer to control the detection system to see whether it is working,or it is necessary to start the vehicle for a period of time to observe whether the system shows warning.
Note:
  • If you have any questions, please contact us by email, we will reply you within 24 hours and provide you with a solution.
  • If you are satisfied with our products and services, please give us a five-star rating, thank you!

Recently Viewed Products Recently Viewed Products

,
You have successfully subscribed!
This email has been registered