HOW TO INSTALL SPELAB LED WHEEL RINGS

0 comments / Posted on by SPELAB

A SPELAB Lighting LED Wheel Light Kit is an eye-catching upgrade to anyone’s ride. The question we get asked a lot is “how hard is the install?” Actually, it is very simple. Below is a full step-by-step tutorial that will guide you through the installation process.

Step 1 – Access Your Brake System Vehicle brake rotor

Begin by removing the wheel from your vehicle. Behind each brake system is a metal brake dust shield. This is what will be used to mount your SPELAB LED wheel rings. If your brake shield is extremely dirty, wipe it down with a wet rag or cloth. 

Step 2 – Align Lighting Ring

Mockup the light ring in the desired location. You should test your ring before going any further by connecting it to a DC5V / 12V / 24V. While testing, check the way the light reflects and mark the ring in the desired location.

Step 3 – Attach Mounting Brackets

Each ring has five mounting brackets, select the location according to your needs - remove the unneeded brackets. The pre-drilled hole is where the ring mounts to the bracket. However, you will need to drill through the aluminum ring and use the self-tapping screws to drill through the dust shield. Use the self-tapping screws to attach the dust shield and the bracket at the same time. This will ensure that the bracket is mounted tightly to the dust shield.

Step 4 – Mounting Wheel Ring

Use your drill to make necessary holes in the aluminum led wheel ring in the locations that have been marked in previous steps. You should now be ready to permanently mount each lighting wheel to its specified brackets. Be sure to position it correctly and make sure all screws are fully tightened.

Step 5 – Fasten Wires

All wires should be securely fastened. Use zip ties to attach your wiring to the factory brake lines. Slack is required around the control arms to allow the vehicle’s suspension to have full articulation and motion without causing damage to the wiring.

Buy the SPELAB LED WHEEL RING with the below button.

0 comments

Leave a comment

All blog comments are checked prior to publishing

Custom Auto Parts Service
Free Returns in store
Secure Shopping
24.7 Help Center
You have successfully subscribed!