H&S Mini Maxx V1 Tuner Installation Guide
Source: https://www.spelabautoparts.com/pages/mini-maxx-v1-installation-guide
Applications 2006-2007 5.9L Dodge Cummins | 2007.5-2009 6.7L Dodge Cummins | 2010-2012 6.7L Dodge Cummins | 2003-2007 6.0L Ford Powerstroke | 2008-2010 6.4L Ford Powerstroke | 2011-2013 6.7L Ford Powerstroke | 2007.5-2010 6.6L LMM Duramax | 2011-2013 6.6L LML Duramax You can also download the original PDF of these instructions: H&S Mini Maxx Installation Manual (PDF) . Bill of Materials The list below includes by name the major parts included in your Mini Maxx package. Mini Maxx (Micro SD Card in Mini Maxx) Mini Maxx Power Cable OBD II Adapter Windshield Mount Mini USB Cable HDMI Cable USB Adapter Parts Description This section describes each of the parts in the Bill of Materials, the descriptions provide a physical set of attributes and a purpose for each part. The parts descriptions also list everything that is included in each assembly. The Mini Maxx Head Unit The main component is the Mini Maxx Head Unit. The Head Unit is the interface in which you control vehicle performance parameters. It is also the brains that will save vehicle activity and defuel a vehicle. Notice that the head unit has: seven total buttons, five on the left side and two on the right, a large color screen, and an electronic plug for docking on the back. Note that this is the last piece that you will install. Note: Mini Maxx includes a micro SD card inserted in the side of the Head Unit. Power Cable The Power cable connects the OBD II Adaptor Plug to the vehicle fuse box to supply power to the Mini Maxx. It is optional to use as there are two ways to power up your Mini Maxx (Recommended) Use this power cable and wire it to the designated location specified later in this manual. The OBD II port provides constant 12V+ power, so your Mini Maxx can power off of the OBD II port alone. But in this situation the Mini Maxx will not turn on and off with the ignition. There is a switch on the OBD II adapter plug in order to turn the Mini Maxx on and off. OBD II Adapter Plug The OBD II Adapter is a communication hub for the Mini Maxx. The OBD II Adaptor plugs directly into the vehicle OBD II port. Notice the OBD II Adaptor has many ports to support various other functions of the Mini Maxx. Universal Windshield Mount This universal windshield mount is used to install the Mini Maxx firmly onto the windshield, it is a suction cup mount that will work on any vehicle windshield. Check our web site for other mounting options, the Mini Maxx is adaptable to a range of other mounting styles. Mini USB Cable Use this cable to connect your Mini Maxx to your personal computer to install software updates. Please find your product application and follow the posted instructions there to update your Mini Maxx. HDMI Cable The HDMI Cable connects the Mini Maxx to the OBD II Adapter Plug and acts as the main line of communication for the Mini Maxx. USB to Micro SD Adapter The USB to Micro SD Adapter is what you will use to update your Mini Maxx. You will take the Micro SD card out of the Mini Maxx and insert it into the adapter, then insert the adapter into your personal computer. Installation Overview The installation overview illustrates a totally installed and functional Mini Maxx system. This overview is meant to help reference the general location of installed parts and pieces of the Mini Maxx. Notice that there are different overview diagrams. Use the correct diagram for your truck. For more complete wiring diagrams and instructions, please see vehicle specific features starting on page 27. The overview shows the Mini Maxx and windshield mount, the HDMI cable, the OBD II port, the OBD II adapter plug, and — where the optional power cable is used — the run from the adapter plug to the fuse box through the firewall grommet. Mini Maxx Installation Instructions Section 1: Mounting the Mini Maxx In this section you will decide where to mount the Mini Maxx Cradle, so you are essentially choosing the location for the Mini Maxx inside the vehicle cab. First, decide which mounting style you will choose for the Mini Maxx; we offer two different styles of mounting: Windshield mounting Custom Pod mounting Windshield Mounting Locate the T-shaped mount socket on the back side of the Mini Maxx. Notice that the top of the universal mount will fit into T-shaped socket and slide forward to secure the Mini Maxx to the mount. With the Mini Maxx connected to the mount use the windshield mount to secure the Mini Maxx to the windshield. Be sure that the position of the Mini Maxx does not obstruct the view of the road or distract the driver from their primary responsibility, which is driving responsibly. Section 2: OBD II Adapter Plug This step involves locating the vehicle’s OBD II port and then simply plugging the OBD II Adapter Plug into the OBD II port. As the illustration below shows, OBD II ports are always located somewhere under the driver’s side dash. The OBD II port is a male receiver that will have the same shape as the end of the OBD II Adaptor plug. Once the OBD II port is located, then simply plug the OBD II Adaptor plug into the OBD II port. OBD II Adapter Plug Diagram: OBD II Male end: this is the part of the adapter plug that plugs into the vehicle OBD II port. Main harness port: the main harness will plug into the Mini Maxx and into this port during installation. Power wire port: the power wire will run from this port to the vehicle fuse box during installation. Plug into the Mini Maxx and into this port during installation. Power supply switch: use this switch to change power from battery power to keyed power for a powered supply for the Mini Maxx. Four pin usb: This port is used if an H&S pyrometer kit is purchased for the Mini Maxx. Five pin usb Adapter plug fuse Note: On some vehicles it is recommended to move the OBD II port to a safer location. Because the Mini Maxx will remain plugged in, the adapter can be kicked/bumped and broken. Please move your OBD II connection to a safer location if you feel it is in a position that may allow it to get damaged. Section 3: Installing the Power Wire (*Optional) *The OBD II port provides constant 12V+ power, so your Mini Maxx can power off of the OBD II port alone. But in this situation the Mini Maxx will not turn on and off with the ignition. There is a switch on the OBD II adapter plug in order to turn the Mini Maxx on and off. In this section you will run the Power Wire coming from the Mini Maxx Cradle to the vehicle fuse box and connect it to the fuse locations specified below. The fuse location for the Power Wire is different on each vehicle application. Connecting the Power Wire: Route wire to location shown in pictures found in the Vehicle Specific Sections starting on page 27 Remove the fuse, indicated in the pictures, and insert the fuse jack. Make sure that the fuse jack is placed on the dead side of the fuse to ensure that the Mini Maxx is protected by the fuse. Use a volt meter to verify the dead side of the fuse. With the fuse pulled and the truck powered on but not started, the volt meter should read 0 volts on the fuse jack to ground. Problems that can occur if the incorrect fuse is used for this connection: the power may stay on continuously even with the key off; or, the Mini Maxx can receive power at the incorrect time of the power-on/starting cycle of the vehicle. Run the power wire through the firewall before preparing the Power Wire. Prepare the Power Wire by stripping the end of the wire about ¼”. Connect the blue 90° connector to the end of the Power Wire using crimping pliers. Connect the Power Wire to the fuse jack, place the fuse back into the slot, and close the fuse box. Section 4: Run Mini Maxx HDMI Cable In this section you will connect the Mini Maxx HDMI cable to the OBD II Adaptor plug and then run the other end of the HDMI cable up the side of the vehicle dash and connect it to the back of the Mini Maxx. Plug one end of the HDMI cable into the Main Harness port on the OBD II adapter plug. Run the other end of the HDMI cable up through the vehicle dash on the driver’s side so that the end of the cable emerges from the dash near the vehicle A-pillar. It may be necessary to temporarily remove the vehicle weather stripping and dash panel to achieve an installation where the HDMI cable cannot be seen. Plug the HDMI cable into the back side of the Mini Maxx, make sure that there is enough slack in the cable to accommodate mounting the Mini Maxx to the windshield. Almost Done! You need to install the download now. Read the next section for Install Download procedure. Mini Maxx Operating Instructions These operating instructions are split into sections: Section 1: Button Navigation Section 2: Install Download Section 3: Exploring the Main Screen Section 4: Exploring the Menu System Section 5: Vehicle Setup Section 6: Other Mini Maxx Features Section 7: Vehicle Specific Features Section 8: Unplugging the Head Unit Section 1: Button Navigation Press the top left button to enter the Main Menu, also use this button to exit menus. Press any of the four buttons on the left to select items on the screen that are adjacent to the button position. In general these buttons work as up and down buttons, they may also be used to select items on the screen adjacent to these buttons. Section 2: Install Download The Install Download option is used to install tuning onto a vehicle, or return a vehicle to stock. Press Menu: To get into the Mini Maxx main menu. Select Install Download: You may have to "Arrow Down" or "Arrow Up" to find this option. Install a download onto a stock vehicle: If the vehicle is stock and you enter the install download menu, simply follow the screen prompts to install a download on the vehicle. This is the point in which you may come across the tire size calibration menu, and the vehicle speed limiter menu. Download H&S Tuning: This option will install the H&S Performance tuning to your truck. Custom tuning options can be downloaded from H&S or may be available as options during the installation process. Import/Export MCC Tuning: This option will allow import or export of MCC software tuning files. Some vehicles may not have this option. Return to stock (OEM tune): This option will return the vehicle to its factory software level and unlock the device. This is highly recommended if taking the vehicle in for service or maintenance. NOTE: Returning to stock is required in order to install your tuner on another vehicle. This Mini Maxx screen shot shows what you will see if a download has already been entered into a vehicle. Before installing the download: Make sure that the Mini Maxx is properly plugged in. Make sure that the harness is properly installed. The vehicle battery is fully charged. The vehicle is warmed up to operating temperature. THE MICRO SD CARD MUST BE INSERTED IN THE SIDE OF THE MINI MAXX TO DOWNLOAD TO A VEHICLE. Section 3: Exploring the Main Screen The Main Screen is where you view all of the vehicle activity. In this section you will learn how to navigate the Main Screen and learn about all of the different parts of the Main Screen. Main Screen Navigation — Below are descriptions of how all of the Mini Maxx buttons work and what they do while in the Main Screen. The buttons perform different functions while in a menu or submenu. Press any of the four buttons on the left that coincide with the four vehicle parameters to display that particular vehicle parameter on the large gauge in the upper right side of the screen. Hold a button down to view the different graph types for the large gauge. Power Level Up / Power Level Down — Use the power level buttons to control power levels on-the-fly only while in the main screen. Press the top left button to enter the Main Menu, also use this button to exit menus. Main Screen Parts Description — This section will describe all of the different parts of the Main Screen. Large Gauge. Vehicle parameters: To change which vehicle parameter is displayed in the large gauge area simply press one of the four buttons next the preferred vehicle parameter. By pressing and holding the button next to your displayed gauge, you can change the display style in the large gauge area. Menu button. Press to enter the main menu. Power level text. Displays which power level is active, whether it be: Stock, Tow, Street, or Hot. Note: This will not be active if the Download has not been installed. The black bar. The black bar highlights the title of one of the four displayed vehicle parameters to indicate that vehicle parameter is also being displayed on the large gauge. Section 4: Exploring the Menu System The diagram below shows all of the Main Menu items and explains the Main Menu navigation. Install Download Gauge Set Up Set User Options Set Defuel Levels Adjust Tire Size Diagnostics Show Settings Update Firmware Navigation through the main menu: Use the large Up Down Buttons to page up and page down through all the Main Menu options. These buttons are used to enter into the sub menus from the main menu and may also be used to select additional items when in the sub menus. This button is used to enter into the Main Menu from the main screen. While in any of the menus this button works as a back button. Section 5: Vehicle Setup This section describes various non-vehicle specific features of the Mini Maxx. Defueling Parameters. Set up defueling parameters based on a number of different vehicle parameters. In this menu you can also turn vehicle parameters off. The defueling parameters available are vehicle specific, so not all defueling parameters are available for every make and model. Here is a list of all of the defueling capabilities for the Mini Maxx. All defueling options can be activated at the same time, all can be turned off, or a mix of on and off. Each defueling option is adjusted individually to be on or off and set to a particular defueling temperature. Engine Coolant Temp Level Boost Level Transmission Temperature Oil Temperature Pyro 1 Temperature Level Pyro 2 Temperature Level Default Defueling Settings: Defuel option Default Pyro 1 Temperature Level 1450˚F Pyro 2 Temperature Level OFF Engine Coolant Temp Hot 210°F Engine Coolant Temp Cold (cold start protection) OFF Boost Level OFF Transmission Temp Level OFF Oil Temperature OFF Current settings are displayed in Defuel Menu. Set Defuel Levels. When entering a setup menu for any of the defuel options the menu will have a list of defuel levels to select from based on that specific defuel parameter. The selected value is displayed on the left, to select a defuel level you need only highlight the amount and then exit the setup menu. To turn any particular defuel parameter off press the bottom left button. Use the large Up Down Buttons to scroll up and down through the different sub menu items. Use this button to turn the defueling on. Use this button to turn the defueling off. Section 6: Other Mini Maxx Features This section describes all the customizing features of the Mini Maxx. Gauge Setup. Enter to change the vehicle parameters displayed on the four gauge locations in the Main Screen. This is also where you can see all of the most up-to-date vehicle parameters available to your vehicle make and model after running an internet upgrade. Selecting a vehicle parameter to display in a particular location is done by highlighting the gauge location and then highlighting the desired vehicle parameter. Once the correct vehicle parameter for a gauge location has been highlighted, you do not need to press another button to select that vehicle parameter. Simply highlighting the vehicle parameter makes it active in that location. To highlight a different gauge location press the selection button that coincides with that gauge location. So to select gauge location 1, press the second button down on the left hand side of the Mini Maxx. To select the 4th gauge location press the bottom button or the 5th button down on the left side. Use the large Up Down Buttons to highlight a particular vehicle parameter for any of the gauge locations. Notice that upon entering the gauge setup menu that, Set Gauge 1, is highlighted in black. When a gauge location is selected it is highlighted in black on the left and it also appears above the vehicle parameter selection box. Adjust Backlight. Highlight screen and use the up and down buttons to adjust the lighting to your preference. Select 0 to 100% using the buttons to set desired light level for the Screen. Change Background Color. Use the up and down buttons to select a background color. The Mini Maxx background will preview each color background as you scroll up and down through the color options. When the preferred color is highlighted, exit the color menu to select the color. Performance Testing. This sub menu allows you to run 1/4 mile and 0-60 MPH performance testing on your vehicle. You must accept the on screen disclaimer before entering the Performance Testing menu. 1/4 MILE PERFORMANCE TEST — When selecting Start Test make sure that you are completely stopped. The testing will begin when vehicle reads speed. The testing will automatically stop when you have reached 1/4 mile. Test results and fastest times will be stored and viewable at any time. 0-60 MPH PERFORMANCE TEST — When selecting Start Test make sure that you are completely stopped. The testing will begin when vehicle reads speed. The testing will automatically stop when you have reached 60 MPH. Test results will appear on screen. NOTE: If running aftermarket tires or gearing, your speedometer must be calibrated correctly for performance testing to yield accurate results. Diagnostics. This function allows you to check vehicle diagnostics codes. Some models you will have an option to check Engine or Transmission diagnostics. Please select the desired module. Upon entering this menu, the Mini Maxx will automatically begin to check the vehicle for DTCs and it will then display those DTCs on the Mini Maxx screen. Once it displays the DTCs value and description on the screen it will allow you to erase the DTCs from the vehicle. If no DTCs are displayed you can simply press the Go Back button to return to the main menu. THE MICRO SD CARD MUST BE INSERTED IN THE SIDE OF THE MINI MAXX TO READ AND ERASE DTCs. Reset to Default Setting. To reset the Mini Maxx to Performance factory settings press the up button to select yes, to keep current settings back out of this menu by pressing the go back button or by pressing the down button to select no. Show Settings. The Show Settings Menu will allow you to see vehicle information and also defuel settings. See the diagram below to see everything that is listed in this menu. On Cummins and Powerstroke trucks, the Part# and Transmission# will be needed for updating the Mini Maxx. T.V. # This number is the Tuning Version. It will change updates the tuner software. To see the latest tuner version on your Mini Maxx go to "Show Settings" and scroll down. Micro SD Card. The Micro SD card should only be taken out of the Mini Maxx to perform internet upgrades. It is the primary means of performing internet upgrades for the Mini Maxx. In case a Micro SD Card is lost or broken, a new Micro SD Card can be purchased. Web Updates. Remove the Micro SD from your Mini Maxx. Connect your Micro SD to your personal computer with the included Micro SD to USB adapter to install software updates. Section 7: USA / ULSD Calibration Vehicle Specific Features Each platform below lists the features and adjustment ranges that apply to that vehicle when running the USA / ULSD calibration. 2006 - 2007 5.9L Dodge Cummins Power Levels. Adjusted on-the-fly at the touch of a button after installing the download. The current Power Level will be saved even if the Mini Maxx is unplugged. Stock Tow Street Performance 0 HP 60 HP 120 HP 200 HP Low Boost Fueling. Adjusts the amount of fuel injected under low boost conditions. Five settings: 0 Lowest, 1 Low, 2 Medium (Default), 3 Moderate, 4 High. NOTE: The low boost fueling adjustment will affect ALL power levels. This option can only be adjusted during the Install Download process. Injection Timing. Adjusts the maximum allowed injection timing. Five settings: 0 - 18 degrees, 1 - 24 degrees, 2 - 26 degrees (Default), 3 - 28 degrees, 4 - 32 degrees. NOTE: The injection timing adjustment will affect ALL power levels. This option can only be adjusted during the Install Download process. Speed Limiter. Most 5.9L Cummins trucks have a 106 MPH speed limiter from the factory. The limiter can be adjusted from 50 MPH to 200 MPH. This option can only be adjusted during the Install Download process. Rev Limiter. Most 5.9L Cummins trucks have a 3500 RPM rev limiter from the factory. The limiter can be adjusted from 3000 RPM to 5000 RPM. This option can only be adjusted during the Install Download process. Torque Management (Automatic Transmission Only). Disables the vehicle's torque management for automatics. Recommended for those running standalone aftermarket TCM/transmission packages, but will also slightly improve throttle response on a stock truck. NOTE: By turning the torque management OFF, the PRNDL display will be lost as well as the reverse lights. Tire Size Calibration. Re-calibrates the factory speedometer for non-stock tires. Measure the tire diameter with a tape measure rather than going by the printed size, and a GPS is a good way to dial it in. Entering a larger tire size makes the speedometer read higher; a smaller size makes it read lower. Adjustable from 24” to 42”. Can be adjusted at any time from the Tire Size Calibration menu. Keyed Ignition Source Location. Fuse number 30. Always tap into the cold side of the fuse; on the 2006-2007 5.9L Cummins the cold side is towards the driver's side of the vehicle. Overdrive Transmission Software. For 5.9L Cummins trucks with the 48RFE automatic. Includes modified torque converter lock/unlock strategies that command the TC to lock in 3rd gear under wide open throttle and hold it locked through 4th gear, light-throttle converter strategies that lock up sooner, and modified shift points. On a 2006 Cummins with a stock 48RFE, H&S measured 0.2 to 0.3 second quicker 1/4 mile times from the Overdrive tuning alone. An additional unlock fee may apply. Unplugging Head Unit. If you unplug your head unit your truck will remain at the last known power level you had it set to. 2007.5 - 2009 6.7L Dodge Cummins Power Levels. Adjusted on-the-fly after installing the download. The unit cannot be unplugged otherwise the Power Level will default to Stock. Stock Tow Street Performance 0 HP 40 HP 80 HP 120 HP Speed Limiter. Most 6.7L Cummins trucks have a 106 MPH factory limiter. Adjustable from 20 MPH to 200 MPH, during the Install Download process only. Tire Size Calibration. Adjustable from 25.5” to 45”. Can be adjusted at any time from the Tire Pressure Calibration menu. Special Functions / Features (found in the Special Functions Menu): TPMS: Enable / Disable the Tire Pressure Monitoring System. Optical Chirp on Lock: Enable / Disable the parking lights flashing when locking the vehicle. Horn Chirp on Lock: Enable / Disable the horn chirp when locking the vehicle. Set Head Lamp Delay: Enable / Disable the head lamp delay. Accessory Delay: Enable / Disable the shut-off delay of your radio and accessory system after the key has been turned off. Fog Lights W/High: Enable / Disable the fog lights staying on when high beams are being used. Daytime Lights: Enable / Disable the daytime running lights. Seat Belt Minder: Enable / Disable the chime for the driver's seat belt system. This feature will not disable the seat belt light. Auto Door Lock: Enable / Disable the automatic door locking when the vehicle reaches certain speeds. Unlock Driver Door: Enable / Disable unlocking only the driver door when pushing the unlock button on the key fob. When enabled, the unlock button on the key fob will need to be pressed twice in order to unlock all doors. Idle Up (Auto Only): Enable / Disable the use of the cruise control buttons to control idle RPM. Follow your vehicle owners manual to use this feature. NOTE: If any special feature is already listed as Enabled but is not functioning correctly, you may need to disable the feature, cycle the key, and re-enable the feature to make it function properly. If it still does not work, your vehicle may not be equipped with the hardware required for the special feature. The previous selection will NOT be saved. If the Special Functions/Features Menu is exited and returned into, it will not display your previous selection. This is normal and the Enable/Disable function is still working properly. Keyed Ignition Source Location. Fuse number 30. On the 2007.5-2009 6.7L Cummins the cold side is towards the driver's side of the vehicle. Overdrive Transmission Software. For 6.7L Cummins trucks with the 68RFE automatic. Includes boosted line pressures, modified full and part throttle torque converter lock/unlock strategies, adjusted full and part throttle shift points, adjusted shift firmness and modified torque management tables. H&S measured 0.2 to 0.3 second quicker 1/4 mile times on test trucks. Overdrive tuning options: 4th-5th gear shift point, adjustable up or down at light to medium throttle (WOT is NOT adjustable). 5 levels: 1 Lowest, 2 Stock shift point, 3 Medium, 4 Default, 5 Highest. 5th-6th gear shift point, adjustable up or down at light to medium throttle (WOT is NOT adjustable). 5 levels: 1 Lowest, 2 Stock shift point, 3 Medium, 4 Default, 5 Highest. Line pressure. WARNING, only designed for built transmissions. The factory transmission pump is NOT designed to be run more than 165-170 psi. The current overdrive tune sets these values to 170 psi. With a modified pump this adjustment can increase clutch holding pressure; H&S have tested up to 250 psi. 5 levels: 1 Stock 160 psi, 2 Default 170 psi, 3 200 psi, 4 225 psi, 5 250 psi. Shift Firmness, modifies the acceleration rate between gear shifts. 5 levels: 1 Stock, 2 Light firm, 3 Default, 4 Firm, 5 Most firm. NOTE: An additional unlock fee may apply. *Overdrive Transmission Software is not available on Cab & Chassis models. Unplugging Head Unit. If you unplug your head unit, your truck will default to the STOCK setting within a few drive cycles. 2010 - 2012 6.7L Dodge Cummins Power Levels. Adjusted on-the-fly after installing the download. The unit cannot be unplugged otherwise the Power Level will default to Stock. Model Stock Tow Street Performance 2010-2012 Pickup 0 HP 40 HP 80 HP 120 HP 2011 Cab & Chassis 0 HP 20 HP 40 HP 60 HP Speed Limiter. Most 2010-2012 6.7L Cummins trucks have a 106 MPH factory limiter. Adjustable from 20 MPH to 200 MPH, during the Install Download process only. Torque Management (Manual Transmission Only). Disables the vehicle's torque management for manuals. This option increases pedal sensitivity and throttle response when REMOVED. Tire Size Calibration. Adjustable from 25.5” to 45”. This option can only be seen/changed after the Download is installed to the vehicle. Special Functions / Features (can only be seen/changed after the Download is installed): TPMS, Optical Chirp on Lock, Horn Chirp on Lock, Set Head Lamp Delay, Accessory Delay, Fog Lights W/High, Daytime Lights, Seat Belt Minder — same Enable / Disable meanings as listed under the 2007.5-2009 section above. Stationary Idle Adjust. Adjust the idle speed while in Park or Neutral. Choose the desired idle speed and select Set. Idle speed can be adjusted from 700 RPM to 1500 RPM. Keyed Ignition Source Location. 2010 6.7L Pickup and 2011 6.7L Cab & Chassis: fuse number M45, cold side towards the front of the vehicle. 2011-2012 6.7L Pickup: fuse number M33, cold side towards the front of the vehicle. Overdrive Transmission Software. For 6.7L Cummins with the 68RFE automatic; same feature set as described under 2007.5-2009 above. An additional unlock fee may apply. Video In Motion. Allows customers with a factory installed Chrysler 730N DVD/Navigation unit to unlock all features normally blocked while driving — full destination input while moving and DVD playback on the front screen. May require additional unlock fee. Unplugging Head Unit. If you unplug your head unit, your truck will default to the STOCK setting within a few drive cycles. 2003 - 2007 6.0L Ford Powerstroke Power Levels. Adjusted on-the-fly after installing the download. The current Power Level will be saved even if the Mini Maxx is unplugged. Stock Tow Street Performance 0 HP 40 HP 80 HP 120 HP Speed Limiter. Most 6.0L Powerstroke trucks have a 95 MPH factory limiter. The limiter can be removed completely or left stock. This option can only be changed during the Install Download process. Tire Size Calibration. Adjustable from 25” to 40”. This option can only be adjusted during the Install Download process. Keyed Ignition Source Location. Fuse number 15. On the 2003-2007 6.0L Powerstroke the cold side is towards the driver side of the vehicle. Unplugging Head Unit. If you unplug your head unit your truck will remain at the last known power level you had it set to. 2008 - 2010 6.4L Ford Powerstroke Power Levels. Adjusted on-the-fly after installing the download. The current Power Level will be saved even if the Mini Maxx is unplugged. Stock Tow Street Performance 0 HP 40 HP 80 HP 120 HP Speed Limiter. Most 6.4L Powerstroke trucks have a 95 MPH factory limiter. Adjustable from 55 MPH to 200 MPH, during the Install Download process only. Tire Size Calibration. Adjustable from 25” to 60”, during the Install Download process only. TPMS Adjustability / Disable. Many 2008-2010 6.4L Powerstrokes have a factory TPMS. Using the tuning device and a 6.4L Powerstroke TPMS Adapter (Part #709913) gives full control of the TPMS: front and rear tire pressures are independently adjustable from 0-100 PSI, with the option to disable the TPMS completely if removing the sensors. All TPMS changes must be done with the adapter in place, and the adapter must be removed after changes are made to resume normal tuner function. Transmission Relearn. The 5R110 automatic has Adaptive Memory and is constantly learning. After the Install Download the adaptive memory is automatically reset. H&S highly recommend performing the relearn procedure. To perform it: After tuning is installed, perform each of the following 0-80 MPH runs while in the Performance power level. During this relearn process you may experience hesitation during shifts, hard shifts, or defuel patterns, all of which are normal: 0-80 MPH @ 25% throttle position, then slow down and come to a complete stop. 0-80 MPH @ 50% throttle position, then slow down and come to a complete stop. 0-80 MPH @ 100% throttle position, then slow down and come to a complete stop. The Transmission Relearn procedure is complete. When re-training the transmission, ALWAYS follow posted speed limits. Do NOT attempt runs in adverse weather conditions such as snow, ice, rain, wind, or any other conditions that may affect your vehicle's traction or impair your visibility! NOTE: On any vehicle using 3” or larger lift blocks under the rear leaf pack, it is HIGHLY RECOMMENDED to install traction bars. With any added horsepower, failure to do so may result in harsh shifting and may cause premature transmission and/or driveline damage. Keyed Ignition Source Location. SOLID PURPLE wire (capped from the factory), found under the driver's side dash, bundled with multiple other capped wires near the OBD-II port. Unplugging Head Unit. If you unplug your head unit your truck will remain at the last known power level you had it set to. 2011 - 2013 6.7L Ford Powerstroke Power Levels. Adjusted on-the-fly after installing the download. The unit cannot be unplugged otherwise the Power Level will default to Stock. Stock Tow Street Performance 0 HP 40 HP 80 HP 120 HP Tire Size Calibration. Adjustable from 31” to 34”. Can be adjusted at any time from the Tire Size Calibration menu. TPMS Adjustability / Disable. With the H&S tuning device you have full control of the TPMS: front and rear pressures independently adjustable from 0-120 PSI, plus the option to disable the TPMS completely if removing the sensors. NOTE: TPMS adjustments will not take full effect on a stationary vehicle. Once adjustments have been made, it can take up to 5 miles of driving before changes take effect. Transmission Tuning. For the 6R140 automatic: boosted line pressures, modified full and part throttle lock/unlock strategies, adjusted shift points, adjusted shift firmness and modified torque management tables. H&S measured 0.2 to 0.3 second quicker 1/4 mile times on test trucks. An additional unlock fee may apply. Transmission Relearn. If you selected to tune the transmission during the Install Download, the adaptive memory is automatically reset when the download completes. Perform the same three 0-80 MPH runs at 25%, 50% and 100% throttle described under the 6.4L section above. NOTE: On any vehicle using 3” or larger lift blocks under the rear leaf pack, it is HIGHLY RECOMMENDED to install traction bars when adding additional horsepower. Keyed Ignition Source Location. WHITE WIRE WITH BLUE STRIPE (capped from the factory), found under the driver's side dash, bundled with multiple other capped wires near the emergency brake lever. Unplugging Head Unit. If you unplug your head unit, your truck will default to the STOCK setting within a few drive cycles. 2007.5 - 2010 6.6L LMM Duramax Power Levels. Adjusted on-the-fly after installing the download. The current Power Level will be saved even if the Mini Maxx is unplugged. Stock Tow Street Performance 0 HP 40 HP 80 HP 120 HP Speed Limiter. Most 6.6L LMM Duramax trucks have a 98 MPH factory limiter. Adjustable from 50 MPH to 95 MPH or removed completely, during the Install Download process only. Tire Size Calibration. Adjustable from 25” to 60”, during the Install Download process only. NOTE: On some vehicles, entering a tire size larger than 35” may cause the ABS light to illuminate. Transmission Reset / Relearn. The automatic transmission has Adaptive Memory. H&S highly recommend a reset and relearn after installing tuning: After you have installed the tuning, turn the key to the ON position. From the Main Menu, scroll down until you see the Reset Transmission option. Select Reset Transmission and follow the on-screen instructions to reset the transmission adaptive memory. After the transmission reset is complete, it is recommended to perform each of the following 0-80 MPH runs while in the Performance power level: 0-80 MPH @ 25% throttle, stop; 0-80 MPH @ 50% throttle, stop; 0-80 MPH @ 100% throttle, stop. The Transmission Relearn procedure is complete. NOTE: On any vehicle using 3” or larger lift blocks under the rear leaf pack, it is HIGHLY RECOMMENDED to install traction bars when adding additional horsepower. Keyed Ignition Source Location. Fuse number 45. On the 2007.5-2010 6.6L LMM Duramax the cold side is towards the rear of the vehicle. Unplugging Head Unit. If you unplug your head unit your truck will remain at the last known power level you had it set to. 2011 - 2013 6.6L LML Duramax Power Levels. Power levels are not currently shift-on-the-fly for the 2011-2013 6.6L LML Duramax. To adjust the Power Level, select Install Download from the Main Menu and follow the on-screen instructions. Speed Limiter. Most 6.6L LML Duramax trucks have a 98 MPH factory limiter. The limiter may be removed completely but WILL result in a loss of cruise control and exhaust brake function. This option can only be changed during the Install Download process. Tire Size Calibration. (Not currently available for the 2011-2013 6.6L LML Duramax.) NOTE: On some vehicles, entering a tire size larger than 35” may cause the ABS light to illuminate. Transmission Reset / Relearn. Same procedure as the LMM section above: select Reset Transmission from the Main Menu, then perform the three 0-80 MPH runs at 25%, 50% and 100% throttle. NOTE: On any vehicle using 3” or larger lift blocks under the rear leaf pack, it is HIGHLY RECOMMENDED to install traction bars when adding additional horsepower. Keyed Ignition Source Location. Fuse number 45. On the 2011-2013 6.6L LML Duramax the cold side is towards the front of the vehicle. Unplugging Head Unit. Not shift-on-the-fly, so unplugging the head unit will not affect the power level setting. Section 8: High Sulfur Calibration Vehicle Specific Features Notice!! The remaining pages in this manual are intended for those running a High Sulfur calibration. Notice!! All vehicle specific information prior to this section still applies to those using High Sulfur calibrations. When the High Sulfur calibration is used, the features listed below are ADDITIONAL to all other features contained in this manual. Disclaimer: Illegal usage of the High Sulfur calibration is NOT allowed. Any alteration of a device in an attempt to obtain High Sulfur capabilities will be cause for Warranty termination. 2007.5 - 2009 6.7L Dodge Cummins High Sulfur Power Levels. Adjusted on-the-fly at the touch of a button after installing the download. The unit cannot be unplugged otherwise the Power Level will default to Stock. Stock Tow Street Performance 0 HP 60 HP 120 HP 175 HP Injection Timing. Adjusts the maximum allowed injection timing. Five settings: 1 - 24 degrees, 2 - 26 degrees, 3 - 28 degrees (Default), 4 - 30 degrees, 5 - 32 degrees. NOTE: The injection timing adjustment will affect ALL power levels. This option can only be adjusted during the Install Download process. Adjustable Throttle Response. Three settings: 1 - Stock Response, 2 - Default Response, 3 - High Response. Emissions Selection. Most 2007-2009 6.7L Cummins are equipped with an emissions system designed to run Ultra Low Sulfur Diesel (ULSD) fuel. If you have removed or modified this emissions system (or plan to immediately after installing this device), proper tuning must be installed or the vehicle will not operate correctly. Select REMOVED at this option for a modified emissions system and high sulfur fuel use. Select PRESENT if your emissions system requires ULSD fuel. Exhaust Emissions Equipment. When running ULSD tuning, it is required that all sensors located in the exhaust system stay in place and plugged in, otherwise you may experience a Check Engine Light (CEL) and even a loss of power (limp mode). When running High Sulfur tuning, it is recommended that all sensors located in the factory exhaust system be unplugged from the electrical harnesses. These sensors can also be removed completely with the factory exhaust if desired. On the 2007.5-2009 6.7L Cummins, there are usually 3 EGT Sensors, 2 O2 Sensors, and 1 Pressure Sensor. EGR Emissions Equipment. If you are installing H&S High Sulfur tuning, you must unplug the EGR system on your 2007.5-2009 6.7L Cummins if not installing an EGR delete. Failing to do so may result in erratic engine operation and loss of power. Please follow these instructions carefully to unplug and disable the EGR system: Locate the EGR Throttle Control Valve Assembly (Fig. 1). Assembly is located between the intercooler and intake manifold on the driver's side of the engine compartment. Unplug the EGR Throttle Control Valve wiring harness. The harness is LIGHT GRAY in color and is located on the back side of the Throttle Control Valve Assembly. It is not directly visible when looking at the assembly from above. On some vehicles, it may be easier to see and unplug the harness from underneath the vehicle. Note: There is a red locking tab that must be moved sideways on the harness in order for it to be unplugged. Locate the EGR solenoid on top of the intake manifold (Fig. 2). It is directly visible when looking at the intake manifold and faces towards the front of the vehicle. Unplug the EGR solenoid wiring harness. The connector is BROWN in color. 2010 - 2012 6.7L Dodge Cummins High Sulfur Power Levels. Adjusted on-the-fly at the touch of a button after installing the download. The unit cannot be unplugged otherwise the Power Level will default to Stock. Model Stock Tow Street Performance 2010-2012 Pickup 0 HP 60 HP 120 HP 175 HP 2011 Cab & Chassis 0 HP 25 HP 50 HP 75 HP Emissions Selection. Same REMOVED / PRESENT choice as described in the 2007.5-2009 section above. Exhaust Emissions Equipment. Same ULSD / High Sulfur requirements as the 2007.5-2009 section above. On the 2010-2012 Pickup, there are usually 3 EGT Sensors, 2 O2 Sensors, and 1 Pressure Sensor. 2011 Cab & Chassis UREA System. On the 2011 Cab & Chassis, there is usually an additional NOX sensor as well as a UREA system that needs to be unplugged when running High Sulfur tuning. The UREA system must at least be unplugged but can be completely removed from the vehicle if desired. Failure to unplug the UREA system may result in a check engine light and/or dash messages. Follow these instructions to unplug the UREA system: Locate the wiring harness with the YELLOW sliding lock-tab on the UREA pump assembly. The pump assembly is located near the bottom of the filler neck support. Slide the yellow lock-tab DOWN to disengage the lock and unplug the harness. EGR Emissions Equipment. It is not mandatory to unplug the EGR system when installing High Sulfur tuning. You may still unplug the EGR system if desired, or the EGR system may be left plugged in without any ill effects. The entire EGR system can also be completely removed with an aftermarket EGR Delete Kit when running High Sulfur tuning. Injection Timing. Adjusts the Injection Timing Calibration tables. Five settings: 1 - Least Aggressive (Stock Setting), 2 - Less Aggressive, 3 - (Default), 4 - More Aggressive, 5 - Most Aggressive. If you skip this adjustment option, you will be defaulted to level 3. NOTE: The injection timing adjustment will affect ALL power levels. This option can only be adjusted during the Install Download process. 2008 - 2010 6.4L Ford Powerstroke High Sulfur Power Levels. Adjusted on-the-fly after installing the download. The current Power Level will be saved even if the Mini Maxx is unplugged. Stock Tow Street Performance 0 HP 80 HP 160 HP 250 HP Emissions Selection and Exhaust Emissions Equipment. Same requirements as the Cummins sections above. On the 6.4L Powerstroke, there are usually 3 EGT Sensors and 1 Pressure Sensor. NOTE: The vehicle will not run with sensors removed unless High Sulfur tuning is installed. EGR Emissions Equipment. When running High Sulfur tuning, it is not required to unplug or block-off the EGR system on your 6.4L Powerstroke to disable it. The EGR system is already disabled in the tuning and will not function under any conditions. If desired, the entire EGR system can be unplugged, blocked-off, or completely removed when running H&S High Sulfur tuning. Tune Selection. Pick from 3 tuning options. To change this selection you must repeat the install download process. Easy Power levels are: stock, 60hp, 120hp, and 175hp Mild Power levels are: stock, 80hp, 160hp, and 250hp Hot Damn 300 Power levels are: 50hp, 125hp, 225hp, 300hp Shift Schedule. Change the shift logic of the automatic transmission. Two options; to change them you must repeat the install download process. Schedule 1: This option will lock the torque converter in 4th gear under normal driving, and keep it locked through 5th gear. Schedule 2: This option will not lock the torque converter until 5th gear under normal driving. NOTE: The Easy Power Tuning also has Easy shift schedule. It is NOT adjustable. Shift Point. Modify shift points for the 3-4 and 4-5 shifts. Three options; to change them you must repeat the install download process. Low: This option will shift into high gears at the lowest possible road speed. Med: This option is the middle range of shift points High: This option will shift into high gears at the highest possible road speed. Low Boost Fueling Adjustment. Limit the amount of fuel delivered based upon turbo boost levels. 0 will have the least smoke output, 5 will have the most. By skipping this feature, the tuning will default to level 2. 2011 - 2013 6.7L Ford Powerstroke High Sulfur Power Levels. Adjusted on-the-fly after installing the download. The unit cannot be unplugged otherwise the Power Level will default to Stock. Stock Tow Street Performance 0 HP 50 HP 100 HP 150 HP Emissions Selection. Same REMOVED / PRESENT choice as the sections above. Exhaust Emissions Equipment. Same ULSD / High Sulfur requirements as the sections above. On the 6.7L Powerstroke, there are usually 3 EGT Sensors, 1 NOX Sensor, 1 UREA Injector, and 1 Pressure Sensor. NOTE: The vehicle will not run with sensors removed unless High Sulfur tuning is installed. UREA / SCR System. On the 2011-2013 6.7L Powerstroke, there is a UREA system that can be unplugged or removed completely when running High Sulfur tuning. The UREA system may also be left plugged in with no ill effects. EGR Emissions Equipment. If you are installing High Sulfur tuning, you must unplug the EGR system on your 2011-2013 6.7L Powerstroke if not installing an EGR delete. Failing to do so may result in damage to your EGR parts. Please follow these instructions carefully to unplug and disable the EGR system: Unplug Orange EGR harness found on top of the EGR cooler assembly. The yellow lock tab must be slid out before the harness can be unplugged. Unplug the EGR Butterfly Valve located near the radiator fan shroud. 2007.5 - 2010 6.6L LMM Duramax High Sulfur Power Levels. Adjusted on-the-fly after installing the download. The current Power Level will be saved even if the Mini Maxx is unplugged. Stock Tow Street Performance 0 HP 60 HP 120 HP 175 HP Emissions Selection. Same REMOVED / PRESENT choice as the sections above. Exhaust Emissions Equipment. Same ULSD / High Sulfur requirements as the sections above. On the 6.6L LMM Duramax, there are usually 3 EGT Sensors and 1 Pressure Sensor. EGR Emissions Equipment. When running High Sulfur tuning, it is not required to unplug or block-off the EGR system on your 6.6L LMM Duramax to disable it. The EGR system is already disabled in the tuning and will not function under any conditions. If desired, the entire EGR system can be unplugged, blocked-off, or completely removed when running High Sulfur tuning. 2011 - 2013 6.6L LML Duramax High Sulfur Power Levels. Power levels are not currently shift-on-the-fly for the 2011-2013 6.6L LML Duramax. To adjust the Power Level, select Install Download from the Main Menu and follow the on-screen instructions. Stock Tow Street Performance 0 HP 50 HP 100 HP 150 HP Emissions Selection. Same REMOVED / PRESENT choice as the sections above. Exhaust Emissions Equipment. When running ULSD tuning, it is required that all sensors located in the exhaust system stay in place and plugged in, otherwise you may experience a Check Engine Light (CEL) and even a loss of power (limp mode). When running High Sulfur tuning, it is required that all sensors located in the factory exhaust system be unplugged from the electrical harnesses EXCEPT FOR THE PRESSURE SENSOR WHICH MUST REMAIN PLUGGED IN. All sensors other than the Pressure Sensor can be removed completely with the factory exhaust if desired. On the 6.6L LML Duramax, there are usually 3 EGT Sensors, 1 NOx Sensor, 1 UREA Injector, and 1 Pressure Sensor. The DPF Pressure Sensor is located under the bed in front of the axle on the inside of the passenger side frame rail. You may pull the two rubber lines off of the sensor but DO NOT UNPLUG THIS SENSOR! Unplugging of the Pressure Sensor may result in erratic engine operation and loss of power. UREA / SCR System. On the 2011-2013 6.6L LML Duramax, there is a UREA system that needs to be unplugged when running High Sulfur tuning. The UREA system must at least be unplugged but can be completely removed from the vehicle if desired. Failure to unplug the UREA system may result in a check engine light and/or dash messages, erratic engine operation, and loss of power. Follow these instructions to unplug the UREA system: The urea injector is located between the CAT and DPF above the torsion bar cross member. Unplug the electrical connection and the urea line. The main urea harness is the large black harness located near the urea injector above the urea tank. Flip the large gray locking tab to disconnect the harness. EGR Emissions Equipment. If you are installing High Sulfur tuning, you must unplug the EGR system on your 6.6L LML Duramax if not installing a complete EGR delete. Failing to do so may result in erratic engine operation and loss of power. Please follow these instructions carefully to unplug and disable the EGR system: Unplug 3 EGR harnesses - two are brown with a yellow locking tab, one is black with a red locking tab (see pictures for locations). Technical Support Technical Support: email us service@spelabautoparts.com www.spelabautoparts.com Phone: +1 888 301 8666 Mon - Fri: 9:00 AM - 6:00 PM EST Sat - Sun: Closed