Shop vehicle-specific air intake kits for diesel trucks and select gas vehicles to improve airflow, response, intake sound, and filter serviceability. What Is an Air Intake Kit? An air intake kit routes filtered air into the engine through an intake tube, pipe, or manifold. Depending on the product, a kit may include an air filter, heat shield, clamps, couplers, sensor fittings, or intake manifold components. This collection includes more than full cold air intake kits. It also covers intake pipes, heat-shield kits, replacement filters, intake elbow or bridge kits, and selected 6.7L Cummins intake manifolds with grid heater delete components. Included parts vary, so compare the product description before ordering. Air Intake Kit Types Cold air intake kit: normally includes an intake tube and performance air filter for a less restrictive airflow path. Heat-shield intake kit: adds a barrier around the filter to reduce exposure to radiant engine-bay heat. Intake pipe or manifold: replaces a specific factory airflow component rather than the entire intake system. Intake manifold and grid heater delete kit: available for selected 6.7L Cummins applications and should be checked carefully for year and included hardware. Replacement air filter: services an existing compatible intake system without replacing the complete assembly. What Can an Air Intake Kit Improve? A correctly fitted air intake kit can reduce unnecessary inlet restriction, add a more noticeable intake sound, and make filter access easier. Cooler air is denser, but actual intake air temperature depends on filter location, heat shielding, vehicle speed, ambient temperature, and engine-bay airflow. A stock daily driver may mainly gain easier filter service and stronger intake sound. A tuned diesel truck that tows under load may benefit more from reduced restriction, steadier airflow, and improved turbo response. Results vary with engine condition, calibration, intake temperature, exhaust flow, and supporting upgrades. Best For Cummins, Powerstroke, and Duramax owners upgrading a diesel cold air intake kit. Stock truck owners who want improved intake sound and easier filter service. Tuned or modified diesel trucks that need additional airflow support under load. Drivers comparing open-filter, heat-shield, intake pipe, and manifold-style upgrades. Gas truck and performance car owners replacing restrictive or aging intake parts. DIY installers looking for vehicle-specific parts instead of universal intake tubing. Check the Full Airflow System First Weak acceleration, low boost, unusual intake noise, or a check engine light does not automatically mean the factory intake needs replacement. Inspect the air filter, MAF or intake temperature sensor, clamps, couplers, intercooler boots, charge pipes, turbo inlet, and vacuum or boost connections first. An intake upgrade cannot repair a damaged turbocharger, failed sensor, boost leak, or excessive engine wear. Correct diagnosis protects the new parts and helps avoid spending money on an upgrade that will not address the original problem. How to Choose the Right Air Intake Kit Confirm fitment: match the year, make, model, engine size, and engine platform. Identify the product type: determine whether you need a full cold air intake, intake pipe, manifold, heat shield, or replacement filter. Check sensor compatibility: verify MAF and intake temperature sensor locations, fittings, and tube diameter. Review included hardware: check for filters, clamps, couplers, brackets, shields, gaskets, and sensor fittings. Consider driving conditions: towing, dusty roads, off-road use, heavy rain, and jobsite driving affect filter and heat-shield choices. Review tuning requirements: most stock-style kits are designed for factory calibration, but larger tubes or modified sensor housings may require tuning. Air Intake Kit Applications The following table summarizes key applications represented in this collection. Product availability and fitment can change, so confirm the individual product page before purchasing. Vehicle Platform Engine Applicable Years Product Types Dodge Ram 2500/3500 5.9L Cummins Diesel 1994-2002 Cold air intake and heat-shield kits Dodge Ram 2500/3500 5.9L Cummins Diesel 2003-2007 Cold air intake kits Dodge Ram 2500/3500/4500/5500 6.7L Cummins Diesel 2007.5-2012 Cold air intake kits Dodge Ram 2500/3500 6.7L Cummins Diesel 2007-2018 Intake manifolds and grid heater delete components Dodge Ram 1500/2500 4.7L/5.7L V8 2002-2008 Air intake and dual intake kits Dodge Ram 2500/3500 6.4L HEMI V8 2014-2018 Cold air intake kits Ford F-250/F-350 7.3L Powerstroke Diesel 1999-2003 Cold air intake kits Ford Super Duty 6.0L Powerstroke Diesel 2003-2007 4-inch cold air intake kits Ford F-250/F-350/F-450 6.4L Powerstroke Diesel 2008-2010 Cold air intake and heat-shield kits Ford F-250/F-350/F-450/F-550 6.7L Powerstroke Diesel 2011-2016 Cold air intake kits Ford F-250/F-350/F-450/F-550 6.7L Powerstroke Diesel 2017-2019 Cold air intake kits Ford F-150 3.5L V6 EcoBoost 2012-2014 Cold air intake kits Chevrolet/GMC Silverado and Sierra 6.6L Duramax LB7 2001-2004 Cold air intake kits Chevrolet/GMC Silverado and Sierra 6.6L Duramax LLY 2004-2005 Cold air intake kits Chevrolet/GMC Silverado and Sierra 6.6L Duramax LML 2011-2015 Intake elbow and bridge kits Chevrolet/GMC trucks 4.8L/5.3L/6.0L/6.2L V8 2009-2013 Cold air intake kits Dodge Charger, Challenger, Magnum and Chrysler 300C 5.7L/6.1L HEMI V8 2005-2010 Cold air intake kits Nissan 370Z and Infiniti G37 3.7L V6 2008-2019 Cold air intake kits Volkswagen Golf/Jetta 2.8L VR6 1999-2004 Cold air intake kits Honda Accord 2.2L/2.3L 1998-2002 Air intake kits Materials and Finishes Materials and surface treatments vary by product rather than applying to every kit in the collection. Available constructions may include: Aluminum alloy with a black coating. Stainless steel with a polished finish. Aluminum alloy with a powder-coated finish. Review the individual product specifications for tube material, finish, filter type, included hardware, and care requirements. Installation and Maintenance Before installation, inspect the factory intake path and confirm that all sensors, clamps, couplers, brackets, and breather connections have a matching location on the new kit. Keep debris out of the turbo inlet or throttle body and check for air leaks before driving. Follow the product-specific directions or visit the SPELAB installation instructions . Inspect the filter regularly, especially after dusty, off-road, towing, or jobsite use. Air Intake Kit Video Related Air Intake Guides What Is a Cold Air Intake? How to Choose a Cold Air Intake Fitment and Compliance Note Intake modifications may affect warranty coverage, emissions inspection, sensor calibration, or local compliance depending on the vehicle and product. Customers in the United States and Canada should confirm fitment and local requirements before installation.
Source: https://www.spelabautoparts.com/collections/air-intake-kit